Airtac ACE Compact Cylinder ACE32X110SB
The AirTAC Airtac ACE Compact Cylinder ACE32X110SB is a genuine double acting ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE32X110SB
This AirTAC ACE32X110SB is a double acting ISO 21287 compact cylinder that extends and retracts its rod with air pressure. With a 32 mm bore it delivers 402.1 N push and 345.6 N pull at 0.5 MPa, so it suits light to medium automation tasks. The hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, letting it fit into tight machine frames and guarding where a full-length unit will not. The S code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can mount directly to sense rod position.
For real work, plan on roughly 0.6 times the rated push force, which gives about 24.6 kgf of usable thrust at 0.5 MPa, or about 24 kg lifted vertically with a 2:1 safety margin. The fixed TPU bumper at both ends absorbs end-of-stroke energy, and the S45C hard-chrome rod resists wear in continuous cycling. This model has a male rod thread (B code) and a 1/8" PT port, simplifying connection to existing tooling.
Airtac ACE Compact Cylinder ACE32X110SB Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE32X110SB |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE32X110SB
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE32X110SB Is Used
Compact Jig Clamping
Use the 110 mm stroke to clamp small parts in a CNC fixture where the short ISO 21287 body leaves room for a tool changer or chip guard.
Light Conveyor Stop
Mount on a packaging line to raise a stop pin that sorts cartons; the 402.1 N push at 0.5 MPa easily moves a lightweight diverter.
Gantry Z-Axis Lift
Fit in a pick-and-place gantry to lift a 20 kg gripper assembly; the 24.6 kgf usable thrust provides a solid margin for the vertical move.
Is the Airtac ACE Compact Cylinder ACE32X110SB the Right Cylinder?
When sizing, compare this 32 mm bore against the 25 mm bore (245.4 N push at 0.5 MPa) if you need less force, or step up to the 40 mm bore (628.3 N push at 0.5 MPa) for a heavier load. The 110 mm stroke is within the 200 mm maximum standard stroke for this bore, so no custom order is needed. Remember, this cylinder does not hold its position when air pressure is lost or the valve is centered; for a held load, add a rod lock or pilot check valve. The male rod thread suits clevis or rod-end attachments, and the optional -S magnet (already fitted here) enables position sensing with CMSE or DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE32X110SB FAQ
At 0.5 MPa, push is 402.1 N and pull is 345.6 N. At 0.7 MPa, push is 563.0 N and pull is 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa. These numbers assume clean, dry air at the rated pressure.
It follows ISO 21287, so its body is about 50% shorter than an ISO 15552 profile cylinder, which helps in tight spaces. The fixed TPU bumper at each end absorbs impact at stroke limits, but it is not an adjustable cushion and does not lock or hold a load. For position holding, use a separate rod lock or pilot check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE32X110SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.