Airtac ACE Compact Cylinder ACE32X200
The AirTAC Airtac ACE Compact Cylinder ACE32X200 is a genuine double acting ISO 21287 compact air cylinder with a Ø32mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE32X200
This AirTAC ACE32X200 is a double acting compact cylinder built to ISO 21287, with a 32 mm bore and a 200 mm stroke. Its hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding where a full-length unit will not. The fixed TPU bumper at both ends softens the stop, and the S45C hard-chrome rod resists wear in continuous cycling.
At 0.5 MPa the push force is 402.1 N and the pull is 345.6 N, so a practical working load is about 24 kg (roughly 0.6 times the push) for a 2:1 safety margin. The body has magnet slots, but this unit has no magnet unless you order the optional -S code, which then allows CMSE or DMSE switches. Ports are 1/8" PT, and the female rod thread is M8x1.25.
Airtac ACE Compact Cylinder ACE32X200 Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE32X200 |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE32X200
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE32X200 Is Used
Jig Clamping
Use this 32 mm bore cylinder to clamp small parts in a CNC fixture, where the 402.1 N push at 0.5 MPa holds a workpiece securely during drilling or milling.
Stop Gate
Mount this compact cylinder on a packaging conveyor to raise a stop gate, with the 200 mm stroke allowing enough lift to clear a passing carton.
Guard Door Interlock
Fit this cylinder inside a machine guard frame to slide a locking bolt, using the short ISO 21287 body to fit within the slim profile of the safety enclosure.
Is the Airtac ACE Compact Cylinder ACE32X200 the Right Cylinder?
For a lighter duty in the same footprint, consider the ACE25X200 with a 25 mm bore, which delivers 245.4 N push at 0.5 MPa. If you need more force, step up to the ACE40X200 with a 40 mm bore, giving 628.3 N push at 0.5 MPa. This ACE32X200 is the maximum standard stroke for the 32 mm bore, so if you need longer travel, it becomes a non-standard made-to-order item. Remember, without the -S magnet, no sensors can be mounted, so order the -S code if you plan to use reed or solid-state switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE32X200 FAQ
At 0.5 MPa, the push force is 402.1 N and the pull is 345.6 N. At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa (22-145 psi), with a proof pressure of 1.5 MPa (215 psi).
Yes, it is an ISO 21287 compact cylinder, with a body about 50% shorter than an ISO 15552 profile cylinder. It has a fixed TPU bumper at both ends, not an adjustable cushion. Sensors are only possible if you order the optional -S magnet code; without it, there is no magnet and no way to mount a CMSE or DMSE switch.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE32X200
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.