Airtac ACE Compact Cylinder ACE32X30H
The AirTAC Airtac ACE Compact Cylinder ACE32X30H is a genuine double acting ISO 21287 compact air cylinder with a Ø32mm bore and 30mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE32X30H
This AirTAC ACE32X30H is a double acting compact cylinder that delivers 402.1 N of push force at 0.5 MPa, making it a solid choice for light assembly tasks. Its ISO 21287 short body cuts mounting length by about half compared to an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding.
For real-world sizing, plan on about 24.6 kg of usable vertical lift at 0.5 MPa, which is roughly 60% of the rated push. The hard-anodized aluminium body and S45C hard-chrome rod resist wear, while the fixed TPU bumper absorbs end-of-stroke impact without any adjustment. Since this model has no -S code, it has no magnet, so CMSE or DMSE sensors cannot be fitted unless you order the optional magnet version.
Airtac ACE Compact Cylinder ACE32X30H Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE32X30H |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE32X30H
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE32X30H Is Used
Fixture Clamping
Use in a CNC fixture to clamp small aluminium parts during drilling. The 402.1 N push at 0.5 MPa holds workpieces securely, and the short body fits under a low-profile guard.
Carton Tabbing
Drive a tabbing mechanism on a packaging line that folds and presses cardboard flaps. The 30 mm stroke cycles at up to 500 mm/s, matching high-speed intermittent motion.
Test Probe Actuation
Actuate a spring-loaded test probe on an electronic assembly bench. The compact body allows side-by-side mounting in a dense array, and the fixed TPU bumper prevents probe bounce at the end of stroke.
Is the Airtac ACE Compact Cylinder ACE32X30H the Right Cylinder?
Choose this 32 mm bore unit when you need moderate force in a compact envelope. For lighter duty, the 25 mm bore pushes 245.4 N at 0.5 MPa, while stepping up to 40 mm gives you 628.3 N of push at the same pressure. The 30 mm stroke suits short indexing moves, and the 1/8" port matches standard pneumatic fittings.
This cylinder does not hold its position if air pressure is lost, so add a rod lock or pilot check valve for vertical loads. Mounting options like FA/FB flanges, LB foot, or CA/CB clevis bolt directly to the ISO 21287 face, and the female M8x1.25 rod thread accepts standard attachments.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE32X30H FAQ
At 0.5 MPa, push force is 402.1 N and pull force is 345.6 N. At 0.7 MPa, push rises to 563.0 N and pull to 483.8 N. The theoretical maximum force at 1.0 MPa is 82 kgf. These numbers assume clean, dry air at the rated pressure.
The ACE32X30H follows ISO 21287, a compact standard that saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits in tight spaces. However, this model has no magnet because it lacks the -S option, so CMSE or DMSE switches cannot be used. Order the -S version to get the built-in magnet for sensor feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE32X30H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.