Airtac ACE Compact Cylinder ACE32X35
The AirTAC Airtac ACE Compact Cylinder ACE32X35 is a genuine double acting ISO 21287 compact air cylinder with a Ø32mm bore and 35mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE32X35
This AirTAC ACE32X35 is a genuine ISO 21287 compact double-acting cylinder, pushing with 402.1 N and pulling with 345.6 N at 0.5 MPa. Its short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, letting it fit inside tight machine guards and compact jigs where a full-length cylinder will not. The hard-anodized aluminium body and S45C hard-chrome rod resist wear in continuous cycling.
For a real-world load, plan for about 241 N of safe work at 0.5 MPa, which lifts roughly 25 kg vertically with a 2:1 safety margin. The fixed TPU bumper at both ends absorbs end-of-stroke energy, but it does not lock or hold a load; use a rod lock or pilot check valve if the piston must stay put when air is lost. This model has no magnet, so CMSE or DMSE sensors cannot be mounted unless you order the optional -S code.
Airtac ACE Compact Cylinder ACE32X35 Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE32X35 |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE32X35
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE32X35 Is Used
Fixture Clamping on CNC
Use the 402.1 N push at 0.5 MPa to clamp small aluminum workpieces on a CNC mill table, where the short body fits between T-slot rails and leaves room for tool paths.
Parcel Stop on Conveyor
Mount this 32 mm bore cylinder to raise a stop gate on a parcel sorting line, with the 35 mm stroke lifting a lightweight flap to divert boxes without taking up extra conveyor width.
Label Applicator Press
Drive a label applicator head in a packaging machine, using the 345.6 N pull at 0.5 MPa to retract the head after each cycle, while the compact body fits inside a guarding enclosure.
Is the Airtac ACE Compact Cylinder ACE32X35 the Right Cylinder?
Choose this 32 mm bore when you need a compact cylinder that delivers 402.1 N push at 0.5 MPa in a short envelope. If your application needs more force, step up to the 40 mm bore with 628.3 N push; if space is even tighter, the 25 mm bore offers 245.4 N push. The 35 mm stroke suits short indexing moves, and the 1/8" port matches common small-valve plumbing.
Because this unit has no magnet, select the ACE32X35S version if you plan to use CMSE or DMSE reed or solid-state switches for position sensing. Mounting options like FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot, and FTC brackets bolt directly to the ISO 21287 face, so it drops into standard fixtures without custom adapters.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE32X35 FAQ
At 0.5 MPa, this cylinder pushes with 402.1 N and pulls with 345.6 N. At 0.7 MPa, push rises to 563 N and pull to 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa (22-145 psi), with a proof pressure of 1.5 MPa (215 psi).
Yes, it is an ISO 21287 compact cylinder, with a body about 50% shorter than an ISO 15552 profile cylinder. It has a fixed TPU bumper at both ends to absorb impact. However, this model has no magnet, so you cannot mount CMSE or DMSE sensors unless you order the optional -S version, which includes the magnet for switch detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE32X35
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.