Airtac ACE Compact Cylinder ACE32X75S
The AirTAC Airtac ACE Compact Cylinder ACE32X75S is a genuine double acting ISO 21287 compact air cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE32X75S
This AirTAC ACE32X75S is a double acting ISO 21287 compact cylinder, with air extending and retracting the 12 mm rod. It delivers a 402.1 N push force at 0.5 MPa, so a practical working load is about 246 N (0.6 times the rating), which translates to lifting roughly 25 kg vertically with a 2:1 safety margin. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, letting it fit into tight machine guards and gantries.
The 32 mm bore unit uses a hard-anodized aluminium body and an S45C hard-chrome plated rod, with a fixed TPU bumper at each end to absorb impact. This model carries the optional -S magnet, so you can mount CMSE or DMSE reed or solid-state switches for position sensing. The port is 1/8" PT, and the female rod thread is M8x1.25, ready for standard ISO 21287 accessories.
Airtac ACE Compact Cylinder ACE32X75S Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE32X75S |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | 484 N |
| Max (@1.0 MPa) | 82 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE32X75S
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE32X75S Is Used
Fixture Clamping
Use in a CNC fixture to clamp small aluminum parts with a 402.1 N push force at 0.5 MPa, where the compact body fits under a workholding table.
Parcel Stop Gate
Mount on a packaging conveyor to raise a stop gate for boxes up to 25 kg, using the 75 mm stroke to clear the product path.
Pick-and-Place Yoke
In a gantry pick-and-place cell, drive a small vacuum gripper with the -S magnet and CMSE switch to confirm full extension before pickup.
Is the Airtac ACE Compact Cylinder ACE32X75S the Right Cylinder?
For lighter duty, the ACE25X75 offers a 245.4 N push at 0.5 MPa, while stepping up to the ACE40X75 gives 628.3 N push, both with the same 75 mm stroke. Choose this ACE32X75S when you need a balance of compact size and moderate force, and note that the fixed TPU bumper does not hold a load; use a rod lock or pilot check valve if the load must stay put when air is removed. The -S magnet is fitted here, so you can add CMSE or DMSE switches for end-of-stroke detection, and the ISO 21287 face accepts FA, FB, LB, CA, CB, CR, SDB, and FTC mountings.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE32X75S FAQ
At 0.5 MPa, push is 402.1 N and pull is 345.6 N. At 0.7 MPa, push is 563 N and pull is 483.8 N. The theoretical maximum force is 82 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), with a proof pressure of 1.5 MPa (215 psi).
The ACE32X75S body is about 50% shorter than an ISO 15552 profile cylinder, so it fits in tight spaces like machine guards or jigs. It has a fixed TPU bumper at both ends to absorb impact, but it does not lock or hold a load. The -S magnet allows CMSE or DMSE switches for position sensing, and the 1/8" port is standard for this bore.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE32X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.