Airtac ACE Compact Cylinder ACE50X15
The AirTAC Airtac ACE Compact Cylinder ACE50X15 is a genuine double acting ISO 21287 compact air cylinder with a Ø50mm bore and 15mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ50 mm
- Stroke15 mm
- Port size1/8"
- Acting typeDouble acting
- Rod threadM10×1.5
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE50X15
This ACE50X15 is a double acting ISO 21287 compact cylinder with a 50 mm bore and a 15 mm stroke. Its short body trims about 50% of the mounting length versus an ISO 15552 profile cylinder, so it slips into tight fixtures where a full-length unit will not fit.
At 0.5 MPa it pushes with 981.7 N and pulls with 881.2 N, which translates to a safe working load of about 60 kg when you apply a 0.6 derating factor. The hard-anodized aluminium body and S45C hard-chrome rod resist wear, and the fixed TPU bumper at both ends softens end-of-stroke impact.
Airtac ACE Compact Cylinder ACE50X15 Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE50X15 |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø50 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/8" |
| Rod thread | M10×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 250 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 881 N |
| 0.7 MPa | 1374 N | 1234 N |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE50X15
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 50 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE50X15 Is Used
Fixture Clamping
Use the ACE50X15 to clamp parts in a CNC machining fixture; its 981.7 N push at 0.5 MPa holds workpieces firmly, and the compact body fits under the spindle guard.
Carton Ejection
In a packaging line, this cylinder can push finished cartons off a conveyor onto a chute. The 15 mm stroke is enough for a quick nudge, and the short body keeps the mechanism slim.
Sorting Gate
Mount the ACE50X15 as a diverting gate in a warehouse sortation system. Its 881.2 N pull at 0.5 MPa retracts a stop plate reliably, and the fixed bumper handles repeated cycles.
Is the Airtac ACE Compact Cylinder ACE50X15 the Right Cylinder?
For a lighter duty, the ACE40X15 gives 628.3 N push at 0.5 MPa, while stepping up to the ACE63X15 delivers 1558.6 N push. Since this model has no magnet, order the -S code if you need to mount CMSE or DMSE sensors; without -S, no sensor can be fitted. The 1/8" port suits standard pneumatic fittings, and the M10x1.5 female rod thread accepts common attachments.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE50X15 FAQ
At 0.5 MPa, push is 981.7 N and pull is 881.2 N. At 0.7 MPa, push is 1374.4 N and pull is 1233.7 N. The theoretical maximum force is 200.2 kgf at 1.0 MPa.
The ACE50X15 has a short body that saves about 50% of the mounting length compared to an ISO 15552 profile cylinder. It also has a fixed TPU bumper at both ends to absorb end-of-stroke energy, and the optional -S magnet enables CMSE or DMSE sensors for position detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE50X15
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.