Airtac ACE Compact Cylinder ACE80X100
The AirTAC Airtac ACE Compact Cylinder ACE80X100 is a genuine double acting ISO 21287 compact air cylinder with a Ø80mm bore and 100mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke100 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE80X100
This AirTAC ACE80X100 is a double acting compact cylinder that uses air to both extend and retract its 20 mm rod. Its 80 mm bore delivers a 2513.3 N push force at 0.5 MPa, which is enough to handle moderate automation tasks, and the fixed TPU bumper at each end absorbs impact to protect the mechanism.
Because it follows the ISO 21287 compact standard, its body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding where a full-length unit will not. For a safe working load, plan for about 1508 N (0.6 times the push force) at 0.5 MPa, which equals lifting roughly 154 kg vertically with a 2:1 safety margin, helping you match it to real part weights.
Airtac ACE Compact Cylinder ACE80X100 Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE80X100 |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE80X100
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 80 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE80X100 Is Used
Jig Clamping
Use the 2513.3 N push at 0.5 MPa to clamp sheet metal parts in a welding jig, where the compact body fits between locating pins and the fixed bumper prevents shock to the fixture.
Conveyor Stop Gate
Mount this cylinder to raise a stop gate on a packaging line, with the 100 mm stroke lifting a 10 kg product carton and the short body saving space under the conveyor frame.
Carton Pusher
In a warehouse sorting station, use the pull force of 2356.2 N at 0.5 MPa to retract a pusher arm that diverts boxes onto a side chute, with the TPU bumper absorbing end-of-stroke impact.
Is the Airtac ACE Compact Cylinder ACE80X100 the Right Cylinder?
When sizing this ACE80X100, compare it with the ACE63X100 which pushes 1558.6 N at 0.5 MPa for lighter duty, or step up to the ACE100X100 which pushes 3927.0 N if you need more force. The 1/4" port matches common shop air lines, and the 100 mm stroke suits medium-travel applications within the 300 mm maximum standard stroke for this bore. Since this model has no -S code, there is no magnet fitted, so you cannot mount CMSE or DMSE sensors; order the -S variant if you need position sensing. The fixed TPU bumper only decelerates at stroke ends, so for holding a load in position when air is removed, add a rod lock or pilot check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE80X100 FAQ
At 0.5 MPa, the push force is 2513.3 N and the pull force is 2356.2 N. At 0.7 MPa, the push force is 3518.6 N and the pull force is 3298.7 N. The theoretical maximum force is 512.6 kgf at 1.0 MPa. These figures are for the 80 mm bore with a 20 mm rod.
The ACE80X100 is an ISO 21287 compact cylinder, so its body is about 50% shorter than an ISO 15552 profile cylinder, which helps in tight spaces. This model has no magnet because the -S code was not ordered, so you cannot mount CMSE or DMSE switches. If you need position sensing, you must order the -S version to get the built-in magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE80X100
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.