Airtac ACE Compact Cylinder ACE80X10B
The AirTAC Airtac ACE Compact Cylinder ACE80X10B is a genuine double acting ISO 21287 compact air cylinder with a Ø80mm bore and 10mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke10 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE80X10B
This AirTAC ACE80X10B is a double acting compact cylinder that uses air to both extend and retract its 20 mm rod. Its 80 mm bore delivers a 2513.3 N push force at 0.5 MPa, making it a strong choice for medium-duty automation tasks. The short ISO 21287 body cuts about 50% of the mounting length compared to an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding where a longer unit would not.
With a 10 mm stroke, this unit is built for quick, short movements rather than long travel. The hard-anodized aluminium body and S45C hard-chrome plated rod resist wear in continuous cycling. Since this version has no -S code, it has no magnet, so CMSE or DMSE sensors cannot be used; order the optional -S magnet if you need position sensing. For a real-world load, plan for about 1508 N (roughly 154 kg) of safe working force, which is 60% of the rated push, to keep a good safety margin.
Airtac ACE Compact Cylinder ACE80X10B Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE80X10B |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 10 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE80X10B
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 80 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE80X10B Is Used
Die Stamping Ejector
Use the ACE80X10B to eject stamped parts from a die in a metal forming press. The 2513.3 N push at 0.5 MPa clears heavy blanks, and the short 10 mm stroke matches the ejector pin travel, while the compact body fits between die plates.
Conveyor Stop Gate
Mount this cylinder on a packaging line to raise a stop gate that halts cartons for labeling. The 80 mm bore provides enough force to hold back a queue of boxes, and the 10 mm stroke is just right for lifting the gate clear of the product path.
Clamping Fixture
In a CNC machining cell, use the ACE80X10B to clamp a workpiece against a fixture stop. The 2356.2 N pull force at 0.5 MPa secures parts during drilling, and the fixed TPU bumper absorbs the shock of each clamp cycle, extending service life.
Is the Airtac ACE Compact Cylinder ACE80X10B the Right Cylinder?
Choose the ACE80X10B when you need a strong, short-stroke push in a compact envelope. If your application requires less force, the ACE63X10B with a 63 mm bore provides 1558.6 N push at 0.5 MPa, while the ACE100X10B with a 100 mm bore boosts that to 3927.0 N. This model uses a 1/4" port and has a male rod thread (B code), so verify your fittings and rod coupling match. Since it has no magnet, it cannot be used with magnetic switches; if you need position feedback, select the -S version instead.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE80X10B FAQ
At 0.5 MPa, the push force is 2513.3 N and the pull force is 2356.2 N. At 0.7 MPa, push is 3518.6 N and pull is 3298.7 N. The theoretical maximum force is 512.6 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa (22-145 psi), and the proof pressure is 1.5 MPa (215 psi).
No, not with this version. The ACE80X10B has no magnet because the -S code was not ordered. Without the optional -S magnet, CMSE or DMSE reed and solid-state switches cannot be mounted. If you need position sensing, order the ACE80X10BS instead. The cylinder itself has a fixed TPU bumper at both ends, not an adjustable cushion, and operates at 30-500 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE80X10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.