Airtac ACE Compact Cylinder ACE80X150S
The AirTAC Airtac ACE Compact Cylinder ACE80X150S is a genuine double acting ISO 21287 compact air cylinder with a Ø80mm bore and 150mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke150 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE80X150S
This AirTAC ACE80X150S is a double acting ISO 21287 compact cylinder that extends and retracts its rod with air pressure on both strokes. The 80 mm bore delivers a 2513.3 N push force at 0.5 MPa, and the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits into tight machine frames where a full-length cylinder will not.
For real-world sizing, plan for roughly 1508 N of usable work at 0.5 MPa, which is about 154 kg of vertical lift with a 2:1 safety margin. The optional -S magnet is fitted on this model, so you can mount CMSE or DMSE reed and solid-state switches directly on the body for position sensing. The fixed TPU bumper at both ends absorbs end-of-stroke impact, but it does not lock or hold a load if air pressure is lost.
Airtac ACE Compact Cylinder ACE80X150S Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE80X150S |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE80X150S
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE80X150S Is Used
CNC Guard Door Actuator
Use this 80 mm bore cylinder to open and close a heavy polycarbonate guard door on a CNC milling machine. The 2513.3 N push force at 0.5 MPa easily moves the door, and the compact body fits within the machine's frame envelope.
Pallet Stop on Conveyor
Mount this cylinder on a conveyor line to raise and lower a pallet stop. The 2356.2 N pull force at 0.5 MPa retracts the stop reliably, and the optional -S magnet lets a CMSE switch confirm the stop is down before the pallet advances.
Carton Tamping in Packaging
In a packaging cell, this cylinder can tamp down a tall carton before sealing. The 150 mm stroke provides enough travel to press the flaps, and the hard-anodized aluminium body resists wear from continuous cycling at speeds up to 500 mm/s.
Is the Airtac ACE Compact Cylinder ACE80X150S the Right Cylinder?
When selecting between bores, compare this 80 mm unit against the 63 mm bore, which pushes 1558.6 N at 0.5 MPa, or the 100 mm bore, which pushes 3927.0 N. The 80 mm bore is a strong mid-range choice for applications needing over 2500 N of push force without the bulk of a 100 mm cylinder. The 150 mm stroke is within the standard 300 mm maximum for this bore, so no custom order is needed.
This model has a female M12x1.75 rod thread and a 1/4" port. If you need to hold a vertical load when air is off, add a rod lock or pilot check valve, because the TPU bumper only decelerates at the ends and does not act as a brake. For mounting, FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot, and FTC brackets all bolt to the ISO 21287 face.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE80X150S FAQ
At 0.5 MPa, the push force is 2513.3 N and the pull force is 2356.2 N. At 0.7 MPa, push is 3518.6 N and pull is 3298.7 N. The theoretical maximum force is 512.6 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa (22-145 psi), and the proof pressure is 1.5 MPa (215 psi).
The magnet is an optional -S feature, and this model includes it because the code ends with S. With the magnet fitted, you can mount CMSE or DMSE reed and solid-state switches to detect the piston position. Without the -S code, there is no magnet, so sensors cannot be used.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE80X150S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.