Airtac ACE Compact Cylinder ACE80X150SBH
The AirTAC Airtac ACE Compact Cylinder ACE80X150SBH is a genuine double acting ISO 21287 compact air cylinder with a Ø80mm bore and 150mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke150 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE80X150SBH
This AirTAC ACE80X150SBH is a double acting ISO 21287 compact cylinder with an 80 mm bore and a 150 mm stroke, delivering 2513.3 N of push force at 0.5 MPa. Its short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding where a full-length cylinder will not.
The hard-anodized aluminium body and S45C hard-chrome plated rod resist wear in repetitive cycles. The fixed TPU bumper at each end absorbs impact energy, and since this model carries the optional -S magnet, you can mount CMSE or DMSE reed or solid-state switches for position sensing. For real work at 0.5 MPa, plan for about 1508 N of usable force, which lifts roughly 154 kg vertically with a 2:1 safety margin.
Airtac ACE Compact Cylinder ACE80X150SBH Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE80X150SBH |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE80X150SBH
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE80X150SBH Is Used
Fixture Clamping
Clamp a 150 kg workpiece in a CNC milling fixture with the 2513.3 N push force, using the compact body to fit between the table and spindle guard.
Conveyor Stop Gate
Actuate a stop gate on a packaging line to divert boxes weighing up to 150 kg, with the 150 mm stroke clearing the conveyor width.
Pallet Lift Assist
Lift one side of a 300 kg pallet for strap insertion, using the 2356.2 N pull force at 0.5 MPa to raise a corner safely.
Is the Airtac ACE Compact Cylinder ACE80X150SBH the Right Cylinder?
For lighter loads in the same compact footprint, consider the ACE63X150 with 1558.6 N push at 0.5 MPa, or step up to the ACE100X150 for 3927.0 N push. The 1/4" port matches standard shop air lines, and the male rod thread (B code) simplifies mounting to a load or tooling. Since this is a double acting cylinder, it does not hold position when air is removed; for a held load, add a rod lock or pilot check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE80X150SBH FAQ
At 0.5 MPa, push is 2513.3 N and pull is 2356.2 N. At 0.7 MPa, push is 3518.6 N and pull is 3298.7 N. The theoretical maximum force is 512.6 kgf at 1.0 MPa. Operating pressure range is 0.15-1.0 MPa (22-145 psi).
The body is about 50% shorter than an ISO 15552 profile cylinder, so it fits in tight spaces. It has a fixed TPU bumper at both ends to absorb impact, and the optional -S magnet allows CMSE or DMSE switches for position feedback. The 1/4" port and male rod thread simplify installation.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE80X150SBH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.