Airtac ACE Compact Cylinder ACE80X15S
The AirTAC Airtac ACE Compact Cylinder ACE80X15S is a genuine double acting ISO 21287 compact air cylinder with a Ø80mm bore and 15mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke15 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE80X15S
This AirTAC ACE80X15S is a double acting ISO 21287 compact cylinder that extends and retracts its rod with air pressure on both strokes. Its 80 mm bore delivers a 2513.3 N push and 2356.2 N pull at 0.5 MPa, so it suits mid-weight automation tasks.
The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which lets it fit into tight guards and gantries. The optional -S magnet is fitted here, so CMSE or DMSE reed and solid-state switches can mount directly to sense rod position. For a real-world load, plan for about 1508 N (0.6 times the push force) as a safe working load at 0.5 MPa, which translates to lifting roughly 77 kg vertically with a 2:1 safety margin.
Airtac ACE Compact Cylinder ACE80X15S Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE80X15S |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 15 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE80X15S
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 80 | Bore size in mm. |
| ×15 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE80X15S Is Used
Fixture Clamping
Use this 80 mm bore cylinder to clamp a workpiece in a CNC milling fixture. The 2513.3 N push at 0.5 MPa holds parts firmly, while the short body fits under a machine guard.
Package Stop
Mount this cylinder on a conveyor line to stop or divert boxes. The 15 mm stroke is enough to raise a stop gate, and the 2356.2 N pull retracts it quickly at 0.5 MPa.
Press Ram
In a small assembly press, this cylinder drives a ram to insert bearings or bushings. The 3518.6 N push at 0.7 MPa provides the force needed for a light press fit.
Is the Airtac ACE Compact Cylinder ACE80X15S the Right Cylinder?
Choose this 80 mm bore when you need a compact cylinder with a strong push force, but consider the 63 mm bore (1558.6 N push at 0.5 MPa) for lighter duties or the 100 mm bore (3927.0 N push at 0.5 MPa) for heavier loads. The 15 mm stroke is short, so verify your travel needs; the max standard stroke for this bore is 300 mm. Since this model carries the -S magnet, you can add CMSE or DMSE switches for position sensing. For mounting, use FA or FB flanges, LB foot brackets, CA or CB clevises, CR, SDB pivot, or FTC brackets that bolt to the ISO 21287 face. Remember, this cylinder does not hold its position when air is lost, so add a rod lock or pilot check valve for load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE80X15S FAQ
At 0.5 MPa, the push force is 2513.3 N and the pull force is 2356.2 N. At 0.7 MPa, push is 3518.6 N and pull is 3298.7 N. The theoretical maximum force is 512.6 kgf at 1.0 MPa. These figures are for the 80 mm bore with a 20 mm rod.
The magnet is optional on ACE cylinders, but this model carries the -S code, so it is fitted. With this magnet, you can mount CMSE or DMSE reed or solid-state switches to detect rod position. Without the -S code, no magnet is present. The cylinder has a fixed TPU bumper at both ends, not an adjustable cushion.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE80X15S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.