Airtac ACE Compact Cylinder ACE80X175S
The AirTAC Airtac ACE Compact Cylinder ACE80X175S is a genuine double acting ISO 21287 compact air cylinder with a Ø80mm bore and 175mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke175 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE80X175S
This AirTAC ACE80X175S is a double acting compact cylinder built to ISO 21287, with a hard-anodized aluminium body and an S45C hard-chrome plated rod. At 0.5 MPa it delivers 2513.3 N of push force and 2356.2 N of pull, while the theoretical maximum reaches 512.6 kgf at 1.0 MPa.
The short ISO 21287 body saves about 50% of the mounting length compared to an ISO 15552 profile cylinder, so it fits inside tight machine guards and gantries. The optional -S magnet is fitted on this model, enabling CMSE or DMSE reed and solid-state switches for position sensing. For real work, plan on roughly 1508 N (about 154 kg vertical lift with a 2:1 safety margin) at 0.5 MPa, not the full rated force.
Airtac ACE Compact Cylinder ACE80X175S Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE80X175S |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE80X175S
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE80X175S Is Used
CNC Door Actuation
Mount this ACE80X175S on a CNC machine guard door to provide 2513.3 N of push force at 0.5 MPa, reliably sliding the heavy door open and closed within the compact envelope.
Pallet Stop on Conveyor
Use the 175 mm stroke to raise a pallet stop on a packaging line. The 2356.2 N pull force at 0.5 MPa retracts the stop quickly, and the fixed TPU bumper absorbs the impact at each end.
Carton Pusher in Sorting
In a warehouse sorting system, this cylinder pushes cartons weighing up to 150 kg off a conveyor. The 80 mm bore delivers the necessary thrust while the short body fits between existing rollers.
Is the Airtac ACE Compact Cylinder ACE80X175S the Right Cylinder?
For a lighter duty application, consider the ACE63X175 with 1558.6 N push at 0.5 MPa, or step up to the ACE100X175 for 3927.0 N push. The 80 mm bore offers a strong middle ground for medium-heavy automation tasks. This model has a 1/4" port and a female M12x1.75 rod thread, and the fitted -S magnet allows direct mounting of CMSE or DMSE sensors. Remember, this cylinder does not hold its position if air pressure is lost; use a rod lock or pilot check valve for load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE80X175S FAQ
At 0.5 MPa, the push force is 2513.3 N and the pull force is 2356.2 N. At 0.7 MPa, push increases to 3518.6 N and pull to 3298.7 N. The theoretical maximum force is 512.6 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa (22-145 psi).
The magnet is an optional -S feature, and this ACE80X175S includes it, so you can mount CMSE or DMSE sensors for position detection. The ISO 21287 compact body is about 50% shorter than an ISO 15552 profile cylinder, making it ideal for tight spaces. It has a fixed TPU bumper at both ends, not an adjustable cushion, and operates at speeds from 30 to 500 mm/s.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE80X175S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.