Airtac ACE Compact Cylinder ACE80X200B
The AirTAC Airtac ACE Compact Cylinder ACE80X200B is a genuine double acting ISO 21287 compact air cylinder with a Ø80mm bore and 200mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE80X200B
This AirTAC ACE80X200B is a double acting compact cylinder that uses air to both extend and retract its 20 mm rod. The 80 mm bore delivers a 2513.3 N push force at 0.5 MPa, which is enough to handle moderate automation tasks in tight spaces.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits into compact jigs and guarded machinery. The hard-anodized aluminium body and S45C hard-chrome rod resist wear, while the fixed TPU bumper at each end absorbs end-of-stroke impact. For a real workload, plan for about 1508 N (0.6 times the push force) to keep a safety margin, or it can lift roughly 154 kg vertically with a 2:1 safety factor.
Airtac ACE Compact Cylinder ACE80X200B Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE80X200B |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE80X200B
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE80X200B Is Used
Compact Jig Clamping
Use in a CNC fixture to clamp small parts with 2513.3 N force at 0.5 MPa, fitting into a tight machine envelope where a full-length cylinder would not fit.
Conveyor Stop Gate
Mount on a packaging line to raise a stop gate for diverting boxes. The 200 mm stroke provides enough travel to block or release products smoothly.
Gantry Pick-and-Place
In a warehouse gantry, this cylinder can lift and place light components up to 154 kg with a safety margin, operating at speeds from 30 to 500 mm/s.
Is the Airtac ACE Compact Cylinder ACE80X200B the Right Cylinder?
For a lighter application, consider the 63 mm bore ACE63X200 which pushes 1558.6 N at 0.5 MPa, or step up to the 100 mm bore ACE100X200 for 3927.0 N push force. This 80 mm bore model with a 200 mm stroke suits medium-duty pick-and-place and clamping tasks.
Since this unit has no magnet (no -S code), it cannot use CMSE or DMSE sensors. If you need position sensing, order the -S version. The male rod thread (B) allows direct coupling to linkages, and the port is 1/4" PT. Remember, this cylinder does not hold its position when air is removed; use a rod lock or pilot check valve for load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE80X200B FAQ
At 0.5 MPa, the push force is 2513.3 N and the pull force is 2356.2 N. At 0.7 MPa, push is 3518.6 N and pull is 3298.7 N. The theoretical maximum force is 512.6 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa (22-145 psi), with a proof pressure of 1.5 MPa (215 psi).
Yes, it is an ISO 21287 compact cylinder with a short body that saves about 50% of the mounting length of an ISO 15552 profile cylinder. However, this model has no magnet because the -S option was not ordered, so it cannot use CMSE or DMSE sensors. The fixed TPU bumper at both ends absorbs end-of-stroke energy but does not provide adjustable cushioning or load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE80X200B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.