Airtac ACE Compact Cylinder ACE80X225SB
The AirTAC Airtac ACE Compact Cylinder ACE80X225SB is a genuine double acting ISO 21287 compact air cylinder with a Ø80mm bore and 225mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke225 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE80X225SB
This AirTAC ACE80X225SB is a double acting ISO 21287 compact cylinder that uses air to both extend and retract its 20 mm hard-chrome rod. With an 80 mm bore it delivers 2513.3 N of push force at 0.5 MPa, so it can drive a real workload of about 154 kg when you apply the common 0.6 safety factor to that rating.
The short body saves roughly half the mounting length of an ISO 15552 profile cylinder, which lets it fit inside tight machine guarding and compact jigs. This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches can be mounted to confirm rod position, and the fixed TPU bumper at each end absorbs end-of-stroke energy without needing adjustment.
Airtac ACE Compact Cylinder ACE80X225SB Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE80X225SB |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 225 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE80X225SB
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 80 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE80X225SB Is Used
Jig Clamping
Use the 2513.3 N push at 0.5 MPa to clamp sheet metal parts firmly in a welding jig, where the short body fits between locating pins and the 225 mm stroke allows easy part loading.
Carton Tamping
In a packaging line, this cylinder can tamp down folded cartons before sealing, with the 2356.2 N pull force retracting the rod quickly to keep cycle times near the 500 mm/s maximum speed.
Diverting Stop
Mount this ACE80X225SB on a conveyor to push cartons onto a side lane, using the 3518.6 N push at 0.7 MPa to handle heavier loads while the optional -S magnet signals the switch when the stop is engaged.
Is the Airtac ACE Compact Cylinder ACE80X225SB the Right Cylinder?
For lighter duty in the same compact family, an ACE63 with a 63 mm bore pushes 1558.6 N at 0.5 MPa, while stepping up to an ACE100 gives 3927.0 N for heavier clamping or pressing tasks. Since this ACE80X225SB has a 225 mm stroke and the maximum standard stroke for this bore is 300 mm, you have room to specify a longer standard option if your cycle needs more travel.
Remember that this cylinder does not hold its position when air pressure is lost, so for a vertically suspended load add a rod lock or pilot check valve. The male rod thread (B code) and 1/4" PT port make it ready for direct coupling to standard fixtures and fittings.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE80X225SB FAQ
At 0.5 MPa the push force is 2513.3 N and the pull force is 2356.2 N. At 0.7 MPa the push rises to 3518.6 N and the pull to 3298.7 N. The theoretical maximum force is 512.6 kgf at 1.0 MPa, so plan your real workload at about 60% of the 0.5 MPa push rating for a safe margin.
The short body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight spaces like machine guards and gantries. It has a fixed TPU bumper at each end to absorb impact, and this model includes the optional -S magnet so you can add CMSE or DMSE sensors for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE80X225SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.