Airtac ACE Compact Cylinder ACE80X75S
The AirTAC Airtac ACE Compact Cylinder ACE80X75S is a genuine double acting ISO 21287 compact air cylinder with a Ø80mm bore and 75mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke75 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE80X75S
This AirTAC ACE80X75S is a double acting compact cylinder that extends and retracts its rod with air pressure. It delivers a 2513.3 N push force and a 2356.2 N pull force at 0.5 MPa, making it a strong choice for medium-duty automation. The ISO 21287 body is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight machine frames and guarding where a longer cylinder will not.
Because this model carries the optional -S magnet, you can mount CMSE or DMSE reed or solid-state switches to confirm rod position. The hard-anodized aluminium body and S45C hard-chrome plated rod resist wear in continuous cycling. As a practical guide, plan for about 1508 N of real work at 0.5 MPa, which is roughly 154 kg of vertical lift with a 2:1 safety margin, so you can match it to actual part weights.
Airtac ACE Compact Cylinder ACE80X75S Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE80X75S |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE80X75S
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE80X75S Is Used
Jig Clamping on CNC Fixtures
Clamp 80 mm wide workpieces in a CNC milling fixture. The 2513.3 N push force holds parts firmly, while the short ISO 21287 body fits under the spindle guard without extending into the tool path.
Sorting Gate on a Packaging Line
Divert cartons on a conveyor with a 75 mm stroke gate. The 2356.2 N pull retracts the gate quickly, and the optional -S magnet lets a DMSE switch confirm the gate is fully open or closed for PLC logic.
Pallet Stops in a Transfer Station
Stop and release pallets on a roller conveyor. The 80 mm bore provides enough force to hold a loaded pallet, while the compact body mounts between the rollers, saving valuable floor space in a busy warehouse.
Is the Airtac ACE Compact Cylinder ACE80X75S the Right Cylinder?
For a lighter duty, consider the ACE63X75S with a 1558.6 N push at 0.5 MPa, or step up to the ACE100X75S with a 3927.0 N push for heavier loads. This 80 mm bore model suits applications needing a balance of force and compact size. The 75 mm stroke is within the 300 mm maximum standard for this bore, so it is a standard off-the-shelf unit. Remember that this cylinder does not hold its position if air pressure is lost, so use a rod lock or pilot check valve for load holding. The 1/4" port and M12x1.75 female rod thread connect easily to standard fittings.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE80X75S FAQ
At 0.5 MPa, the push force is 2513.3 N and the pull force is 2356.2 N. At 0.7 MPa, the push is 3518.6 N and the pull is 3298.7 N. The theoretical maximum force at 1.0 MPa is 512.6 kgf. The operating pressure range is 0.15-1.0 MPa (22-145 psi), with a proof pressure of 1.5 MPa (215 psi).
The ACE80X75S has a short body that saves about 50% of the mounting length compared to an ISO 15552 profile cylinder. This lets you install it in tight spaces, such as inside machine guards or on compact gantries. The fixed TPU bumper at both ends absorbs end-of-stroke impact, and the optional -S magnet enables position sensing with CMSE or DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE80X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.