Airtac ACE Compact Cylinder ACE80X75SB
The AirTAC Airtac ACE Compact Cylinder ACE80X75SB is a genuine double acting ISO 21287 compact air cylinder with a Ø80mm bore and 75mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke75 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE80X75SB
This AirTAC ACE80X75SB is a double acting ISO 21287 compact cylinder with an 80 mm bore and a 75 mm stroke. It generates 2513.3 N of push force and 2356.2 N of pull force at 0.5 MPa, with a theoretical maximum of 512.6 kgf at 1.0 MPa. The hard-anodized aluminium body is about 50% shorter than an ISO 15552 profile cylinder, making it a strong fit for tight machine guarding and compact jigs. The male rod thread (B code) simplifies attachment of custom tooling, and the optional -S magnet is fitted here so CMSE or DMSE switches can be mounted for position sensing.
For a real-world load estimate, plan for roughly 1508 N of usable force at 0.5 MPa, which is about 154 kg of vertical lift with a 2:1 safety margin. The fixed TPU bumper at both ends absorbs end-of-stroke impact, but it does not lock or hold a load in position. If the application requires holding a part when air pressure is lost, add a rod lock or pilot check valve. The 1/4" port delivers ample flow for the 30-500 mm/s operating speed range.
Airtac ACE Compact Cylinder ACE80X75SB Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE80X75SB |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 75 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE80X75SB
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 80 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE80X75SB Is Used
Machine Guard Door Actuator
Use the 2513.3 N push force at 0.5 MPa to move a heavy interlocked guard door on a CNC machining center. The compact body fits within the machine frame envelope, and the male rod thread connects directly to a door latch mechanism.
Carton Compression Station
In a packaging line, this cylinder can press and hold cartons during tape application. The 2356.2 N pull force retracts the platen quickly, while the fixed TPU bumper prevents shock to the conveyor frame at cycle rates up to 500 mm/s.
Pallet Stops on Conveyor
Mount this ACE80X75SB vertically to raise and lower a pallet stop on a warehouse conveyor. The 80 mm bore provides enough force to lift a loaded pallet section, and the optional -S magnet lets a PLC confirm the stop position via a DMSE switch.
Is the Airtac ACE Compact Cylinder ACE80X75SB the Right Cylinder?
When sizing this ACE80X75SB, compare it against the smaller 63 mm bore (1558.6 N push at 0.5 MPa) for lighter automation tasks, or step up to the 100 mm bore (3927.0 N push at 0.5 MPa) if you need nearly double the force. The 75 mm stroke is well within the 300 mm maximum standard stroke for the 80 mm bore, so no custom build is required. With the -S magnet already fitted, you can directly mount CMSE or DMSE reed or solid-state switches for end-of-travel detection. Choose from FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot, or FTC brackets to match your existing fixture pattern.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE80X75SB FAQ
At 0.5 MPa, the push force is 2513.3 N and the pull force is 2356.2 N. At 0.7 MPa, push is 3518.6 N and pull is 3298.7 N. The theoretical maximum force is 512.6 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa (22-145 psi), with a proof pressure of 1.5 MPa (215 psi).
The ACE80X75SB has a hard-anodized aluminium body that is about 50% shorter than an ISO 15552 profile cylinder, so it fits into tight spaces like machine guards and gantries. It also comes with a fixed TPU bumper at both ends for impact absorption, and the -S magnet allows CMSE or DMSE sensors to be mounted for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE80X75SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.