Airtac ACE Compact Cylinder ACE80X80B
The AirTAC Airtac ACE Compact Cylinder ACE80X80B is a genuine double acting ISO 21287 compact air cylinder with a Ø80mm bore and 80mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke80 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE80X80B
This AirTAC ACE80X80B is a double acting compact cylinder with an 80 mm bore and an 80 mm stroke, delivering a 2513.3 N push force at 0.5 MPa. Its ISO 21287 short body takes up about half the mounting length of an ISO 15552 profile cylinder, making it a fit for tight automation cells where a full-length unit won't go. The hard-anodized aluminium body and S45C hard-chrome plated rod are built for repeated cycling in dusty shop-floor air.
For a real-world load, plan on about 1508 N of usable work at 0.5 MPa, which translates to lifting roughly 154 kg vertically with a 2:1 safety margin. This model has a male rod thread (B code) and no magnet, so it cannot accept CMSE or DMSE sensors unless you order the optional -S version. The fixed TPU bumper at both ends absorbs end-of-stroke impact, but it does not lock or hold a load in place.
Airtac ACE Compact Cylinder ACE80X80B Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE80X80B |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 80 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE80X80B
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 80 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE80X80B Is Used
Jig Clamping on CNC Fixtures
Use the 2513.3 N push at 0.5 MPa to clamp a 150 kg steel jig plate against a CNC mill table. The compact 80 mm stroke fits under the spindle guard, and the male rod thread lets you bolt a custom clamp arm directly.
Carton Compression Test
In a packaging lab, this cylinder can press down on a corrugated box with about 1508 N of safe force at 0.5 MPa to test crush resistance. The short body mounts inside a test frame where a longer cylinder would interfere with the load cell.
Sorting Gate on a Pallet Line
Mount this ACE80X80B beside a pallet conveyor to push a 120 kg carton off the line at a divert station. The 80 mm stroke is enough to clear the belt edge, and the fixed TPU bumper handles the rapid cycle rate of 30-500 mm/s.
Is the Airtac ACE Compact Cylinder ACE80X80B the Right Cylinder?
When sizing this ACE80X80B, compare it against the ACE63X80, which pushes 1558.6 N at 0.5 MPa, or step up to the ACE100X80 for 3927.0 N of push force. The 80 mm bore is a middle ground for medium-duty pressing or clamping tasks where a 63 mm bore feels underpowered. Since this unit has no magnet, if you need position sensing, you must select the -S code version to fit CMSE or DMSE switches. For mounting, the ISO 21287 face accepts FA/FB flange, LB foot, CA/CB clevis, CR, SDB pivot, and FTC brackets, so it drops into standard fixtures without custom plates.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE80X80B FAQ
At 0.5 MPa, this cylinder pushes with 2513.3 N and pulls with 2356.2 N. At 0.7 MPa, it pushes with 3518.6 N and pulls with 3298.7 N. The theoretical maximum force is 512.6 kgf at 1.0 MPa. These are theoretical values; for a safe working load, plan on about 60% of the 0.5 MPa push force, which is roughly 1508 N.
No, not on this exact model. The ACE80X80B has no magnet because the -S code was not ordered. To use CMSE or DMSE reed or solid-state switches, you need the ACE80X80B-S version, which includes the optional magnet. The fixed TPU bumper at both ends absorbs end-of-stroke energy but does not provide position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE80X80B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.