Airtac ACE Compact Cylinder ACE80X90
The AirTAC Airtac ACE Compact Cylinder ACE80X90 is a genuine double acting ISO 21287 compact air cylinder with a Ø80mm bore and 90mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke90 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE80X90
This AirTAC ACE80X90 is a double acting compact cylinder built to ISO 21287, with a hard-anodized aluminium body that is about 50% shorter than an ISO 15552 profile cylinder. The 80 mm bore delivers 2513.3 N push and 2356.2 N pull at 0.5 MPa, so it suits medium-duty automation where space is tight.
A fixed TPU bumper at each end absorbs impact, and the S45C hard-chrome rod resists wear. Since this model has no -S code, there is no magnet fitted, meaning CMSE or DMSE sensors cannot be mounted unless you order the optional magnet. For a real workload, plan around 1508 N (about 154 kg) at 0.5 MPa, not the full rating, to keep a safety margin.
Airtac ACE Compact Cylinder ACE80X90 Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE80X90 |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE80X90
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE80X90 Is Used
Fixture Clamping
Clamp small automotive brackets in a drill fixture; 2513.3 N push holds parts firmly at 0.5 MPa.
Lane Diverters
Divert cartons on a packaging line with a 90 mm stroke, moving light loads at speeds up to 500 mm/s.
Guard Door Lifts
Lift a safety guard on a machine tool; the compact body fits under the guard frame, and the 2356.2 N pull retracts it reliably.
Is the Airtac ACE Compact Cylinder ACE80X90 the Right Cylinder?
For a lighter option, the ACE63X90 offers 1558.6 N push at 0.5 MPa, while the ACE100X90 steps up to 3927.0 N push. The 1/4" port suits standard shop air, and the 90 mm stroke fits compact transfer slides and clamping fixtures. If you need position sensing, choose the -S variant; without it, this cylinder has no magnet and cannot trigger a switch.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE80X90 FAQ
At 0.5 MPa, push is 2513.3 N and pull is 2356.2 N. At 0.7 MPa, push rises to 3518.6 N and pull to 3298.7 N. The theoretical maximum force is 512.6 kgf at 1.0 MPa.
Only if you order the -S code, which adds a magnet. This model has no magnet, so CMSE or DMSE reed or solid-state switches cannot be mounted. The body has slots for sensors, but they need the magnet to trigger.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE80X90
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.