Airtac ACE Compact Cylinder ACE80X90SB
The AirTAC Airtac ACE Compact Cylinder ACE80X90SB is a genuine double acting ISO 21287 compact air cylinder with a Ø80mm bore and 90mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ80 mm
- Stroke90 mm
- Port size1/4"
- Acting typeDouble acting
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACE Compact Cylinder ACE80X90SB
This AirTAC ACE80X90SB is a double acting ISO 21287 compact cylinder, pushing 2513.3 N and pulling 2356.2 N at 0.5 MPa. Its short body cuts mounting length by about half versus an ISO 15552 profile cylinder, so it fits into tight machine frames and guard enclosures where a full-length unit will not. The 80 mm bore with a 90 mm stroke delivers a practical working load of roughly 1500 N at 0.5 MPa, which translates to lifting about 154 kg vertically with a 2:1 safety margin.
The hard-anodized aluminium body and S45C hard-chrome plated rod resist wear in continuous cycling. This model includes the optional -S magnet, so you can mount CMSE or DMSE reed or solid-state switches for position sensing. The fixed TPU bumper at both ends absorbs end-of-stroke impact, and the 1/4" port allows ample flow for the 30-500 mm/s operating speed range.
Airtac ACE Compact Cylinder ACE80X90SB Technical Specifications
| Model | Airtac ACE Compact Cylinder ACE80X90SB |
|---|---|
| Series | ACE compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø80 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2356 N |
| 0.7 MPa | 3519 N | 3299 N |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac ACE Compact Cylinder ACE80X90SB
| ACE | ISO 21287 compact cylinder (double-acting). |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACE Compact Cylinder ACE80X90SB Is Used
Fixture Clamping
Clamp sheet metal parts in a CNC machining fixture. The 2513.3 N push at 0.5 MPa holds workpieces firmly, while the compact body fits under the spindle guard.
Conveyor Stop Gate
Actuate a stop gate on a packaging conveyor line. The 90 mm stroke lifts a lightweight aluminum gate to divert boxes, and the magnet lets a sensor confirm the gate position.
Carton Pusher
Push cartons off a gravity roller conveyor into a chute. The 2356.2 N pull retracts the pusher quickly, and the fixed bumper prevents jarring at the end of each cycle.
Is the Airtac ACE Compact Cylinder ACE80X90SB the Right Cylinder?
For lighter duty in the same compact footprint, consider the ACE63X90 with 1558.6 N push at 0.5 MPa, while the ACE100X90 steps up to 3927.0 N push for heavier loads. This ACE80X90SB fits between them, offering a balance of force and size for medium automation tasks. The male rod thread (B code) simplifies direct coupling to linkages or tooling, and the optional -S magnet is already fitted, so you can add CMSE or DMSE sensors without disassembly. Remember, this cylinder does not hold position when air pressure is removed; use a rod lock or pilot check valve if the load must stay put.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACE Compact Cylinder ACE80X90SB FAQ
At 0.5 MPa, the push force is 2513.3 N and the pull force is 2356.2 N. At 0.7 MPa, push is 3518.6 N and pull is 3298.7 N. The theoretical maximum force is 512.6 kgf at 1.0 MPa. The operating pressure range is 0.15-1.0 MPa (22-145 psi), and the proof pressure is 1.5 MPa (215 psi).
The ACE80X90SB has a short body that saves about 50% of the mounting length compared to an ISO 15552 profile cylinder. This lets you install it in tight spaces like inside a guard or between machine frames. The fixed TPU bumper absorbs end-of-stroke impact, and the optional -S magnet enables CMSE or DMSE sensors for position feedback. The body is hard-anodized aluminium with a hard-chrome plated rod for durability.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACE Compact Cylinder ACE80X90SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.