Airtac ACED Double-acting Compact Cylinder ACED100X175
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED100X175 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø100mm bore and 175mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke175 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED100X175
A double acting compact cylinder with a rod leaving both covers, the ACED100X175 pushes and pulls with identical force because each stroke works on the rod-side area. At 0.5 MPa the 100 mm bore delivers 3769.9 N in either direction, rising to 5277.9 N at 0.7 MPa. The hard-anodized aluminium body keeps the mounting length roughly 50% shorter than an ISO 15552 profile cylinder, so a 175 mm stroke unit still slots into presses, gantries and guarding where a full-length body would not fit.
The through-rod resists rotation and side load and gives a symmetric mount, and the rear rod can carry a sensor flag or a second tooling plate. A fixed TPU bumper at each end absorbs end-of-stroke energy. For planning, treat roughly 2262 N (about 230 kg of push) as the usable working force at 0.5 MPa, or expect around 192 kg of vertical lift with a 2:1 margin. Speed range is 30-500 mm/s across 0.15-1.0 MPa (22-145 psi).
Airtac ACED Double-acting Compact Cylinder ACED100X175 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED100X175 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED100X175
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED100X175 Is Used
Pneumatic press and forming station
The 3769.9 N bidirectional force at 0.5 MPa suits staking, crimping and light forming on aluminium brackets, with the return stroke delivering the same force for part ejection.
Gantry with dual tooling plates
A rod on each cover lets the ACED100X175 drive a workpiece on the front rod while the rear rod carries a counterweight or sensor flag on a packaging line.
Vertical lift-and-lower module
With about 192 kg of vertical lift capacity at a 2:1 margin, the through-rod handles palletizer pusher arms and lift stations where symmetric mounting matters.
Is the Airtac ACED Double-acting Compact Cylinder ACED100X175 the Right Cylinder?
At this bore size the 100 mm ACED sits between the 80 mm version (2356.2 N at 0.5 MPa) and the 125 mm version (5890.5 N at 0.5 MPa); choose down when the load is under 2000 N and up when you need over 4000 N. The 175 mm stroke is within the 300 mm maximum standard stroke for bore 100, so it ships as a catalog item. Note that a plain double-rod cylinder will drift if air is lost - add a rod lock or pilot check valve where a load must be held. Mounting bolts straight onto the ISO 21287 face: FA/FB flange, LB foot or FTC brackets with I/Y rod knuckles. If you need position feedback, order the -S code so CMSE / DMSE switches can ride the body slots; without -S there is no magnet fitted.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED100X175 FAQ
Yes - the double-rod design means both strokes use the rod-side area, so output is equal either way: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa, with a maximum of 768.8 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/4" port matches the 100 mm bore.
It is an ISO 21287 compact cylinder whose short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end and a female M12x1.75 rod thread. Magnet slots run along the body, but the magnet is the optional -S code - only then can CMSE or DMSE switches be clipped on; the standard unit has no magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED100X175
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.