Airtac ACED Double-acting Compact Cylinder ACED100X175SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED100X175SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø100mm bore and 175mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke175 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED100X175SB
A double acting compact cylinder built to ISO 21287, the ACED100X175SB pushes a 100 mm bore through a 175 mm stroke with a rod leaving both covers, so thrust is identical on the out-stroke and the return. At 0.5 MPa each direction delivers 3769.9 N, rising to 5277.9 N at 0.7 MPa, because both strokes work on the rod-side area. The male-threaded 20 mm rod on each end gives a symmetric mount, resists rotation and side load, and leaves the rear rod free for a sensor flag or a second tooling point.
The hard-anodized aluminium body with an S45C hard-chrome plated rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, from -20 to +70 C, with a fixed TPU bumper at each end. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this bore class fits press fixtures and gantries where a full-length body will not. For positioning, the fitted -S magnet works with CMSE / DMSE switches. As a rule of thumb, plan on roughly 2260 N of usable work at 0.5 MPa, which is about 192 kg of vertical lift with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED100X175SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED100X175SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED100X175SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 100 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED100X175SB Is Used
Symmetric press fixture clamping
The 3769.9 N equal force in both directions lets one ACED100X175SB clamp a steel weldment on the press stroke and eject it on the return, with the male rod thread taking a custom clamp tip.
Reciprocating conveyor pusher
A packaging line cross-transfer uses the through-rod to drive a pusher plate at 30-500 mm/s, with the rear rod carrying a flag past a DMSE switch to confirm each cycle.
Gantry lift-and-lower station
Handling about 192 kg vertically with a 2:1 margin, the cylinder lowers a fixture nest onto locating pins and retracts it, the short ISO 21287 body fitting the tight gantry beam.
Is the Airtac ACED Double-acting Compact Cylinder ACED100X175SB the Right Cylinder?
At 0.5 MPa this 100 mm double-rod unit gives 3769.9 N in both directions. Step down to the 80 mm bore (2356.2 N) for lighter clamping, or up to the 125 mm bore (5890.5 N) when the load needs more margin. The 175 mm stroke sits well inside the 300 mm maximum standard stroke for this bore, so it ships as a standard build. Note that a plain double-rod cylinder drifts when air is lost; add a rod lock or pilot check if the load must stay put. FA/FB flanges, LB foot and FTC brackets plus I and Y rod knuckles bolt straight to the ISO 21287 face, and the -S magnet in this model lets CMSE / DMSE switches report position.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED100X175SB FAQ
Yes. Because a rod exits both covers, both strokes use the rod-side area, so output is equal in each direction: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa. The peak rating at 1.0 MPa is 768.8 kgf. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure.
The S means the optional -S magnet is fitted, so CMSE / DMSE reed or solid-state switches can be clamped into the body slots for end-of-stroke signalling. The ISO 21287 compact body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke energy. FA/FB flange, LB foot and FTC mounts plus I/Y rod knuckles bolt directly to the standard face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED100X175SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.