Airtac ACED Double-acting Compact Cylinder ACED100X200B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED100X200B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø100mm bore and 200mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke200 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED100X200B
A double acting compact cylinder built to ISO 21287, the ACED100X200B pushes a 100 mm bore through a 200 mm stroke with a rod leaving both covers. Because each side works on the rod-side area, output is identical in both directions: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa. The male rod thread (B code) bolts straight to your tooling, and the through-rod resists rotation and side load while the rear rod can carry a sensor flag.
The hard-anodized aluminium body with a hard-chrome plated S45C rod runs at 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s, with a fixed TPU bumper at each end. Its short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses and gantries where a full-length body will not fit. In practice, plan on roughly 2262 N of real work at 0.5 MPa, which corresponds to lifting about 192 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED100X200B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED100X200B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED100X200B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 100 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED100X200B Is Used
Baler ram return
The equal 3769.9 N force in both directions drives a compaction ram forward and retracts it against the same load without a larger return bore.
Pallet elevator columns
Paired through-rods lift about 192 kg per cylinder vertically with a 2:1 margin, and the symmetric rod mount keeps the platform level.
Reciprocating test rig
A 200 mm stroke at up to 500 mm/s cycles a fatigue fixture, with the rear rod carrying a position flag for stroke counting.
Is the Airtac ACED Double-acting Compact Cylinder ACED100X200B the Right Cylinder?
At this force class, step down to the ACED63 (1458.1 N at 0.5 MPa) for lighter clamping, or up to the ACED125 (5890.5 N at 0.5 MPa) when you need over 5 kN. Note that a plain double-rod cylinder drifts when air is lost, so add a rod lock or pilot check valve for a held load. FA/FB flange, LB foot and FTC brackets plus I/Y rod knuckles mount on the ISO 21287 face. This unit has no magnet; order the -S code if you want CMSE / DMSE switch detection.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED100X200B FAQ
Yes. As a double-rod cylinder, both strokes use the rod-side area, so output is equal both ways: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa (22-145 psi operating, 1.5 MPa / 215 psi proof). At 1.0 MPa the peak is 768.8 kgf. Speed range is 30-500 mm/s and the 200 mm stroke sits within the 300 mm max standard stroke for this bore.
B specifies a male rod thread (M12x1.25 class rod-end detail: confirm from datasheet) instead of the female thread. Switches need the optional -S magnet code; this model without S carries no magnet, so no CMSE or DMSE switch will trigger. The fixed TPU bumpers at both ends absorb end-of-stroke energy, and the short ISO 21287 body accepts FA/FB, LB and FTC mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED100X200B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.