Airtac ACED Double-acting Compact Cylinder ACED100X225B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED100X225B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø100mm bore and 225mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke225 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED100X225B
A double acting, double-rod compact cylinder built to ISO 21287, the ACED100X225B pushes a 100 mm bore through a 225 mm stroke with a rod leaving both covers. Because each side of the piston sees the rod-side area, output is identical in both directions: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa. At 0.5 MPa that equals roughly 384 kgf, so halving for a 2:1 margin lets it lift about 192 kg vertically - a real number to match against part weight.
The hard-anodized aluminium body with a hard-chrome plated S45C rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, from -20 to +70 C. Its short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into gantries and press fixtures where a full-length body will not fit. The through-rod resists rotation and side load, and the rear rod can carry a sensor flag; a fixed TPU bumper at each end absorbs end-of-stroke shock.
Airtac ACED Double-acting Compact Cylinder ACED100X225B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED100X225B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED100X225B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 100 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED100X225B Is Used
Reciprocating press fixture
A 225 mm stroke pushing 3769.9 N each way suits a stamping or riveting head on a press jig, where the same force is needed on the return stroke to eject the part.
Pallet lift-and-lower column
With about 192 kg of vertical lift at a 2:1 margin, the double rod guides a small pallet elevator or a scissor-linkage actuator without a separate guide post.
Bidirectional conveyor pusher
Equal force in both directions makes the through-rod ideal for a sorting gate that must divert cartons left or right with identical thrust, with the rear rod carrying a flag.
Is the Airtac ACED Double-acting Compact Cylinder ACED100X225B the Right Cylinder?
At this force class the 100 mm bore sits between the 80 mm (2356.2 N at 0.5 MPa) and the 125 mm (5890.5 N at 0.5 MPa), so step down or up if your load sits far from 3769.9 N. The 225 mm stroke is within the 300 mm standard range for bore 100, so no made-to-order build is needed. Remember that a plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check if the load must stay put.
The B code gives a male rod thread; FA/FB flanges, LB foot and FTC brackets bolt to the ISO 21287 face, and I/Y rod knuckles suit the through-rod. This unit has no magnet - order the -S version if you want CMSE / DMSE switch position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED100X225B FAQ
Because a rod exits both covers, force is equal in both directions: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa (rod-side area both ways). The maximum rating at 1.0 MPa is 768.8 kgf. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, at 30-500 mm/s.
This unit is supplied without a magnet; the optional -S code adds one so CMSE or DMSE switches can be clipped into the body slots. The 1/4" PT ports serve the 100 mm bore, the B code gives a male rod thread, and FA/FB flange, LB foot and FTC brackets mount directly to the ISO 21287 face. The fixed TPU bumpers at both ends only soften end-of-stroke impact - they never hold a load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED100X225B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.