Airtac ACED Double-acting Compact Cylinder ACED100X225S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED100X225S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø100mm bore and 225mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke225 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED100X225S
A double acting through-rod cylinder built to the ISO 21287 compact format, the ACED100X225S pushes a 100 mm bore over a 225 mm stroke with a rod leaving both covers. Because each side works on the rod-side area, output is identical in either direction: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses, gantries and guarding where a full-length body cannot go.
The hard-anodized aluminium body carries a roller-burnished bore, and the 20 mm S45C rod is hard-chrome plated for long seal life. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the through-rod resists rotation and side load while giving a symmetric mount - the rear rod can even carry a sensor flag. The fitted -S magnet lets CMSE / DMSE switches report position along the body slots. As a working rule, keep real duty near 2262 N (about 0.6 of the 0.5 MPa rating), which corresponds to lifting roughly 192 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED100X225S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED100X225S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED100X225S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 100 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED100X225S Is Used
Baling and compacting station
Equal 3769.9 N force in both directions lets one 225 mm stroke compact scrap on the way in and eject the block on the way out with the same cylinder.
Pallet stacker lift column
The through-rod guides the platen from both ends, and the 192 kg vertical-lift equivalent with a 2:1 margin matches loaded pallet trays in a warehouse cell.
Dual-side clamping fixture
A rod at each cover clamps a machined housing from two faces simultaneously on a CNC line, with CMSE switches confirming grip via the fitted magnet.
Is the Airtac ACED Double-acting Compact Cylinder ACED100X225S the Right Cylinder?
Size between the ACED63X225S (1458.1 N at 0.5 MPa) and the ACED125X225S (5890.5 N at 0.5 MPa) if 3769.9 N leaves too much or too little headroom. Remember this cylinder drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. FA/FB flanges, LB feet and FTC brackets bolt straight to the ISO 21287 face, and I/Y rod knuckles suit the 20 mm male-threaded workpiece side. Air supply: 0.15-1.0 MPa (22-145 psi), filtered to 40 um, speed 30-500 mm/s.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED100X225S FAQ
Yes - the double-rod design works on the rod-side area in both directions, so force is equal either way: 3769.9 N at 0.5 MPa, 5277.9 N at 0.7 MPa, and up to 768.8 kgf at the 1.0 MPa maximum. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, running 30-500 mm/s on air filtered to 40 um.
This model carries the optional -S magnet, so CMSE or DMSE reed / solid-state switches clip into the body slots for end-of-stroke or mid-stroke signals. Each end of travel is decelerated by a fixed TPU bumper; it is not adjustable and it does not hold the piston, so use a rod lock or pilot check if the load must stay in place on air loss.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED100X225S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.