Airtac ACED Double-acting Compact Cylinder ACED100X225SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED100X225SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø100mm bore and 225mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke225 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED100X225SB
A double acting compact cylinder built to ISO 21287, the ACED100X225SB pushes a 100 mm bore through a 225 mm stroke with a piston rod leaving BOTH covers. Because each side of the piston sees the rod-side area, output is identical in either direction: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa, both ways. The male-threaded 20 mm rod at each end gives you a symmetric mount and a rear rod that can carry a sensor flag or share the side load.
The hard-anodized aluminium body with an S45C hard-chrome rod saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, so a 225 mm stroke fits gantries and press fixtures that cannot spare full-length space. Working the numbers: at 0.5 MPa the 3769.9 N rating translates to about 384 kg of vertical lift, so halving for a 2:1 margin lets you confidently raise parts around 190 kg. The S in the code means the magnet is fitted, so CMSE / DMSE switches read position straight off the body slots, and fixed TPU bumpers absorb the end-of-stroke shock at both covers.
Airtac ACED Double-acting Compact Cylinder ACED100X225SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED100X225SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 225 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED100X225SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 100 | Bore size in mm. |
| ×225 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED100X225SB Is Used
Heavy press fixture actuation
The symmetric 3769.9 N output at 0.5 MPa clamps and retracts steel weldments in automotive press tooling with identical force both ways, and the 225 mm stroke clears deep die pockets.
Pallet elevator stations
With roughly 190 kg of usable vertical lift at a 2:1 margin, the through-rod raises and lowers pallet nests on packaging lines while resisting the rotation a single-rod setup can introduce.
Bidirectional conveyor pushers
A rod on each cover lets one cylinder divert heavy cartons from either face on a bottling line, with the fitted magnet and CMSE switches confirming home and extended positions.
Is the Airtac ACED Double-acting Compact Cylinder ACED100X225SB the Right Cylinder?
At 3769.9 N per direction at 0.5 MPa, this bore sits between the 80 mm ACED (2356.2 N) and the 125 mm ACED (5890.5 N), so pick 80 mm if your load stays under about 1400 N of real work and step to 125 mm only when the extra force is genuinely needed. Remember that a plain double-rod cylinder drifts when air is lost - for a held vertical load add a rod lock or pilot check valve. FA/FB flanges, LB feet and FTC brackets bolt straight to the ISO 21287 face, and this SB version gives you a male rod thread with PT ports on a 1/4" supply.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED100X225SB FAQ
Both directions equally, because the double-rod design exposes the rod-side area on each stroke: 3769.9 N at 0.5 MPa, 5277.9 N at 0.7 MPa, and up to 768.8 kgf at the 1.0 MPa maximum. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, running at 30-500 mm/s on air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 225 mm stroke fits tight gantries. The S code means the magnet is fitted on this model, so CMSE / DMSE reed or solid-state switches mount in the body slots for end-of-stroke detection, and fixed TPU bumpers at both covers absorb the impact. FA/FB flange, LB foot and FTC brackets attach directly to the standard face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED100X225SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.