Airtac ACED Double-acting Compact Cylinder ACED100X300S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED100X300S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø100mm bore and 300mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke300 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED100X300S
A double acting compact cylinder built to ISO 21287, the ACED100X300S pushes a 100 mm bore through a 300 mm stroke with a rod leaving both covers. Because each side works on the rod-side area, output is identical in either direction: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa. The through-rod resists rotation and modest side load, and the rear rod can carry a sensor flag or a second tooling plate.
The hard-anodized aluminium body with an S45C hard-chrome plated rod runs at 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s, with a fixed TPU bumper at each end. This model carries the optional -S magnet, so CMSE / DMSE switches mount directly in the body slots. At 0.5 MPa the rod-side force equals about 384 kgf, so halving for a 2:1 margin it lifts roughly 192 kg vertically; plan on around 2260 N of usable work force rather than the full rating.
Airtac ACED Double-acting Compact Cylinder ACED100X300S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED100X300S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 300 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED100X300S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 100 | Bore size in mm. |
| ×300 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED100X300S Is Used
Pallet stacker press-down
The symmetric 3769.9 N downstroke seats stacked cartons on a warehouse palletizing head, with the upper rod guiding a linear slide so the plate stays level.
Bottling line pusher gate
A 300 mm stroke sweeps full bottles across a conveyor lane; the rear rod drives a position flag read by CMSE switches at each end of travel.
Steel coil indexing table
Roughly 192 kg of vertical lift capacity at a 2:1 margin indexes heavy coil cradles between stations on a metal processing line.
Is the Airtac ACED Double-acting Compact Cylinder ACED100X300S the Right Cylinder?
At this force class the nearest smaller step is the 80 mm bore at 2356.2 N at 0.5 MPa, while the 125 mm bore reaches 5890.5 N - step down or up depending on your 300 mm stroke duty. Note that a plain double-rod cylinder drifts when air is lost, so add a rod lock or pilot check valve for a held load. Bolt FA/FB flanges, LB feet or FTC brackets to the ISO 21287 face, and remember the magnet is only present on -S codes like this one.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED100X300S FAQ
It is a double-rod cylinder, so force is equal in both directions: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa, with a maximum of 768.8 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/4" port suits the 100 mm bore.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so the 300 mm stroke fits deep guards and gantries. The fixed TPU bumper decelerates the piston at both ends of travel. This model carries the optional -S magnet, allowing CMSE / DMSE reed or solid-state switches to clip into the body slots for end-of-stroke detection.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED100X300S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.