Airtac ACED Double-acting Compact Cylinder ACED100X35B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED100X35B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø100mm bore and 35mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke35 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED100X35B
A double acting compact cylinder built to ISO 21287, the ACED100X35B pushes a 100 mm bore through a 35 mm stroke with a rod leaving both covers. Because each side sees the rod-side area, output is a symmetric 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa in either direction. The male-threaded 20 mm rod (B code) suits external rod couplers and knuckles.
The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses and gantries where a full-length body cannot. With 3769.9 N at 0.5 MPa, plan roughly 2260 N of usable work, which is a vertical lift of about 230 kg - halve that to roughly 115 kg for a 2:1 margin on real parts. Fixed TPU bumpers absorb end-of-stroke shock at both ends, speed spans 30-500 mm/s, and the optional -S magnet enables CMSE / DMSE switches.
Airtac ACED Double-acting Compact Cylinder ACED100X35B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED100X35B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED100X35B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 100 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED100X35B Is Used
Benchtop press and crimp station
The 3769.9 N rod-side force in both directions suits short-stroke crimping, staking and marking of aluminium housings, with the 35 mm stroke matching shallow die travel.
Reciprocating conveyor pusher
A through-rod on both ends lets a sensor flag ride the rear rod while the front rod pushes cartons off a line at 30-500 mm/s, with equal force on return.
Lift-and-locate fixture on a machining cell
Lifts parts of roughly 115 kg vertically with a 2:1 margin at 0.5 MPa; the symmetric double-rod mount resists rotation as the part is raised onto locators.
Is the Airtac ACED Double-acting Compact Cylinder ACED100X35B the Right Cylinder?
At this force class the 100 mm bore sits between the 80 mm (2356.2 N at 0.5 MPa) and the 125 mm (5890.5 N at 0.5 MPa); step down if your load is under 1400 N of work, step up past 230 kg vertical lifts. The 35 mm stroke is well inside the 300 mm max standard for this bore. Remember the piston drifts if air is lost - add a rod lock or pilot check for held loads. FA/FB flanges, LB feet, FTC brackets and I/Y rod knuckles bolt to the ISO 21287 face; order the -S code if you need CMSE / DMSE sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED100X35B FAQ
It is a double-rod cylinder, so force is identical on both strokes: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa (rod-side area, 100 mm bore). Peak output at 1.0 MPa is 768.8 kgf. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, and speed runs 30-500 mm/s.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with fixed TPU bumpers at both ends for end-of-stroke shock. Sensing needs the optional -S magnet code - this model (no S) has no magnet, so no CMSE / DMSE switch can be read. FA/FB flange, LB foot and FTC mounting plus I/Y knuckles fit the standard face; port is 1/4" PT.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED100X35B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.