Airtac ACED Double-acting Compact Cylinder ACED100X70SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED100X70SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø100mm bore and 70mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke70 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED100X70SB
The ACED100X70SB is a double acting, double-rod ISO 21287 compact cylinder: a 20 mm hard-chrome S45C rod exits both covers of the 100 mm bore body, so thrust is identical on every stroke - 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa in either direction. The male rod thread (B code) suits threaded tooling, and the 70 mm stroke sits well inside the 300 mm standard range for this bore.
The hard-anodized aluminium body keeps the mounting length about 50% shorter than an ISO 15552 profile cylinder, so it slots into press fixtures and gantries where a full-length body will not fit. The through-rod resists rotation and side load and gives a symmetric mount, while the rear rod can carry a sensor flag. Because the S code is ordered, the magnet is fitted and CMSE / DMSE switches can be mounted anywhere along the body slots. Running at 0.15-1.0 MPa (22-145 psi) with a 30-500 mm/s speed band, plan on roughly 2260 N of usable work at 0.5 MPa - enough to lift about 192 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED100X70SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED100X70SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 70 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED100X70SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 100 | Bore size in mm. |
| ×70 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED100X70SB Is Used
Press fixture ejector
Pushes formed sheet-metal parts out of a die on both strokes with equal 3769.9 N force, the 70 mm stroke clearing the nest without a long body hanging off the press frame.
Pallet clamp actuator
The male rod thread takes a clamping arm directly, and the through-rod keeps the arm from rotating under the 5277.9 N clamp load at 0.7 MPa.
Gantry lift with position feedback
Lifts about 192 kg vertically with a 2:1 margin while the fitted magnet feeds CMSE / DMSE switch signals to the PLC for top and bottom position confirmation.
Is the Airtac ACED Double-acting Compact Cylinder ACED100X70SB the Right Cylinder?
At this force class the 100 mm bore delivers 3769.9 N both ways at 0.5 MPa; step down to the 80 mm bore (2356.2 N) for lighter tooling or up to the 125 mm bore (5890.5 N) when the load grows. Remember that a plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check if the load must stay put. FA/FB flange, LB foot and FTC brackets bolt straight to the ISO 21287 face, and the fitted -S magnet means CMSE / DMSE position switches are ready to clip on.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED100X70SB FAQ
Because a rod exits both covers, force is equal in both directions: 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa on every stroke, with a maximum of 768.8 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/4" port depends only on the 100 mm bore.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so the 100 mm bore fits tight gantries and guards. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be seated in the body slots for end-of-stroke or mid-stroke detection, and a fixed TPU bumper at each end absorbs stroke-end impact.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED100X70SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.