Airtac ACED Double-acting Compact Cylinder ACED100X75
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED100X75 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø100mm bore and 75mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke75 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED100X75
The ACED100X75 is a double acting, double-rod compact cylinder built to ISO 21287: a 100 mm bore with a 20 mm rod exiting BOTH covers, so the output force is identical in each direction because both strokes work on the rod-side area. At 0.5 MPa it delivers 3769.9 N either way, rising to 5277.9 N at 0.7 MPa, with a peak of 768.8 kgf at 1.0 MPa. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into heavy presses, gantries and clamping fixtures where a full-length body simply will not fit.
The hard-anodized aluminium body carries a roller-burnished bore, and the S45C hard-chrome-plated rods resist wear on both ends. A fixed TPU bumper at each cover absorbs end-of-stroke energy. Because the through-rod resists rotation and side load, the back-end rod can also carry a sensor flag or a second tool. As a working rule, plan on roughly 2262 N (about 60% of the 0.5 MPa rating) for real work, which is equivalent to lifting about 115 kg vertically with a 2:1 margin. Operating range is 0.15-1.0 MPa (22-145 psi), speed 30-500 mm/s, air filtered to 40 um, -20 to +70 C.
Airtac ACED Double-acting Compact Cylinder ACED100X75 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED100X75 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED100X75
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 100 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED100X75 Is Used
Press-fit stamping station
The 3769.9 N through-stroke presses bearings into housings on an automotive assembly line, and the equal return force retracts the tool with the same authority.
Pallet lift-and-lower module
With about 115 kg of usable vertical lift at a 2:1 margin, the double rod guides a pallet elevator squarely without a separate guide column.
Dual-side gate pusher
A rod at each cover lets one cylinder push a conveyor gate from the front and carry a sensor flag on the rear rod, halving the actuator count on the line.
Is the Airtac ACED Double-acting Compact Cylinder ACED100X75 the Right Cylinder?
Size between neighbours: the 63 mm bore gives 1458.1 N at 0.5 MPa, while stepping up to the 125 mm bore reaches 5890.5 N - this 100 mm model at 3769.9 N sits squarely in the middle for heavy clamping and lifting. Remember it does not hold position if air is lost; add a rod lock or pilot check for a held load. Mount with FA/FB flanges, LB feet or FTC brackets plus I/Y rod knuckles on the ISO 21287 face. This code has no magnet; order the -S version if you need CMSE / DMSE switch sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED100X75 FAQ
Yes - it is a double-rod cylinder, so both strokes use the rod-side area and the force is equal either way: 3769.9 N at 0.5 MPa, 5277.9 N at 0.7 MPa, and up to 768.8 kgf at 1.0 MPa. Pressure range is 0.15-1.0 MPa (22-145 psi) with proof pressure of 1.5 MPa (215 psi), speed 30-500 mm/s, and a 1/4" port on this 100 mm bore.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, freeing space in tight guards and fixtures, and it bolts to standard FA/FB flange, LB foot or FTC brackets with I/Y rod knuckles. A fixed TPU bumper at each end absorbs end-of-stroke energy; it does not lock the piston, so use a rod lock or pilot check where a load must be held on air loss. Sensing needs the optional -S magnet code for CMSE / DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED100X75
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.