Airtac ACED Double-acting Compact Cylinder ACED100X80S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED100X80S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø100mm bore and 80mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ100 mm
- Stroke80 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM12×1.75
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED100X80S
A double acting compact cylinder built to ISO 21287, the ACED100X80S pushes a 100 mm bore through an 80 mm stroke with a rod leaving BOTH covers. Because each side works on the rod-side area, output is a matched 3769.9 N at 0.5 MPa in either direction - the back rod never reduces force. The -S code on this model means the magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clipped straight onto the body slots.
The hard-anodized aluminium body pairs with an S45C hard-chrome plated 20 mm rod, and a fixed TPU bumper at each end absorbs end-of-stroke shock. Running on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), it cycles at 30-500 mm/s. The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into presses and gantries where a full-length body will not fit. As a working figure, keep real duty near 2262 N at 0.5 MPa - roughly a 115 kg vertical lift with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED100X80S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED100X80S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø100 mm |
| Stroke | 80 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M12×1.75 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø100mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 3770 N |
| 0.7 MPa | 5278 N |
| Max (@1.0 MPa) | 769 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED100X80S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 100 | Bore size in mm. |
| ×80 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED100X80S Is Used
Heavy press and stamping fixture
The 3769.9 N through-stroke at 0.5 MPa seats automotive bracket blanks into a stamping die, and the equal return force ejects the part without a second cylinder.
Twin-sided gantry actuator
With rods out of both covers on an 80 mm stroke, one ACED100X80S drives a workpiece carrier forward and a sensor flag backward on the same axis of a pallet line.
Pallet clamp on a stretch wrapper
The 100 mm bore grips palletized cartons against a stop while the wrapper spins, and the fitted magnet feeds a CMSE switch to confirm full clamp before cycle start.
Is the Airtac ACED Double-acting Compact Cylinder ACED100X80S the Right Cylinder?
At 100 mm bore this is near the top of the ACED range: step down to the 80 mm bore (2356.2 N at 0.5 MPa) for lighter clamping, or up to the 125 mm bore (5890.5 N at 0.5 MPa) when a fixture needs the extra thrust. Air ports are 1/4" and the female rod thread is M12x1.75. Remember the through-rod does not lock: if the load must stay put when air is lost, add a rod lock or pilot check valve. FA/FB flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the standard ISO 21287 face, and the fitted -S magnet lets you add CMSE / DMSE switches without reordering.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED100X80S FAQ
Yes - the double-rod design puts a rod through both covers, so both strokes use the rod-side area of the 100 mm bore. Force is 3769.9 N at 0.5 MPa and 5277.9 N at 0.7 MPa, identical push and pull, with a peak of 768.8 kgf at 1.0 MPa. Plan real duty around 2262 N at 0.5 MPa, about a 115 kg vertical lift with a 2:1 margin.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. The -S code means the position magnet is already fitted for CMSE / DMSE switches, the 20 mm rod carries a female M12x1.75 thread, air ports are 1/4", and fixed TPU bumpers at both ends absorb end-of-stroke impact. FA/FB flange, LB foot and FTC mounts bolt straight on.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED100X80S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.