Airtac ACED Double-acting Compact Cylinder ACED125X110
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED125X110 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø125mm bore and 110mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ125 mm
- Stroke110 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM16×2.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED125X110
A double acting compact cylinder built to ISO 21287, the ACED125X110 pushes a 125 mm bore through a 110 mm stroke with a rod leaving BOTH covers. Because both strokes work on the rod-side area, output is identical in each direction: 5890.5 N at 0.5 MPa and 8246.7 N at 0.7 MPa. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so this force class fits inside press frames, weld fixtures and gantries where a full-length body simply will not go.
The through-rod resists rotation and side load, and the rear rod can carry a sensor flag or a second tooling plate. A fixed TPU bumper at each end absorbs end-of-stroke energy, and the hard-anodized aluminium body with an S45C hard-chrome rod stands up to daily production duty. As a sizing guide, keep real work near 3534 N (about 0.6 of the 0.5 MPa rating), which corresponds to lifting roughly 300 kg vertically with a 2:1 margin. Note that when air is lost the piston drifts - add a rod lock or pilot check if the load must stay put. The magnet is not fitted on this code; order the -S variant if you want CMSE / DMSE switch detection.
Airtac ACED Double-acting Compact Cylinder ACED125X110 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED125X110 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø125mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED125X110
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 125 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED125X110 Is Used
Heavy press-fit stations
The 5890.5 N symmetric output seats bearings or bushings into housings on an automotive assembly line, with equal force on the return stroke to eject the finished part.
Weld fixture clamping bridges
The short ISO 21287 body drops into tight weld-cell tooling where a full-length profile cylinder would foul the fixture, and the rear rod drives a position flag.
Pallet-stacker lift assist
With about 300 kg of vertical lift capability at a 2:1 margin, the double rod guides a scissor linkage squarely and resists the side load of off-center pallets.
Is the Airtac ACED Double-acting Compact Cylinder ACED125X110 the Right Cylinder?
At 5890.5 N per direction this is the top of the ACED range. If your load is lighter, the ACED100X110 delivers 3769.9 N at 0.5 MPa with the same 110 mm stroke; if you need more, there is no larger bore - step up to a larger series. The 110 mm stroke sits well inside the 300 mm maximum standard stroke for bore 125, so it ships as a standard build. Female M16x2.0 rod thread and 1/4" PT ports; FA/FB flange, LB foot or FTC brackets bolt to the ISO 21287 face. Specify the -S code to enable CMSE / DMSE switches, otherwise no magnet is installed.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED125X110 FAQ
Yes - the double-rod design exposes the rod-side area on both strokes, so force is equal either way: 5890.5 N at 0.5 MPa and 8246.7 N at 0.7 MPa, with a peak of 1201.3 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C.
It is an ISO 21287 compact build whose mounting length is about 50% shorter than an ISO 15552 profile cylinder, with a fixed TPU bumper at each end of the 110 mm stroke. Sensing is not included on this code: the magnet is the optional -S variant, so order ACED125X110S if you want CMSE or DMSE switches on the body slots. Mounting options include FA/FB flange, LB foot and FTC brackets with I/Y rod knuckles.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED125X110
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.