Airtac ACED Double-acting Compact Cylinder ACED125X110B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED125X110B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø125mm bore and 110mm stroke, 1/4" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ125 mm
- Stroke110 mm
- Port size1/4"
- Acting typeDouble acting, double rod
- Rod threadM16×2.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED125X110B
A double acting compact cylinder built to ISO 21287, the ACED125X110B runs a 125 mm bore with a 110 mm stroke and a 25 mm piston rod passing through BOTH covers. Because each side of the piston sees the rod-side area, output is 5890.5 N at 0.5 MPa in either direction - there is no stronger push than pull on this model. The male rod thread (B code) bolts straight to your tooling, and the 1/4" port feeds the high flow this bore needs.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 125 mm bore fits presses and gantries that cannot spare the depth. At 0.5 MPa the usable working push is roughly 3534 N, which is about 300 kg held vertically with a 2:1 margin - enough to lift a full pallet of castings. A fixed TPU bumper at each end absorbs end-of-stroke shock, the hard-anodized aluminium body resists bore wear, and the S45C hard-chrome rod shrugs off side load. FA/FB flange, LB foot and FTC brackets mount on the standard face; add the optional -S code if you later want CMSE / DMSE switch sensing.
Airtac ACED Double-acting Compact Cylinder ACED125X110B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED125X110B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø125 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | 1/4" |
| Rod thread | M16×2.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 300 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø125mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 5890 N |
| 0.7 MPa | 8247 N |
| Max (@1.0 MPa) | 1201 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED125X110B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 125 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED125X110B Is Used
Heavy stamping press
The symmetric 5890.5 N push and pull at 0.5 MPa lets one ACED125X110B both load and eject a steel bracket in a compact stamping die, with the 110 mm stroke clearing the die space.
Pallet lift-assist column
About 300 kg of vertical lift capacity with a 2:1 margin makes the through-rod a direct drive for a counterbalanced lift column on a warehouse palletizing cell.
Foundry mold clamp
The rear rod carries a position flag while the front rod clamps a sand mold at 8246.7 N at 0.7 MPa, and the short body slots into a tight mold-change gantry.
Is the Airtac ACED Double-acting Compact Cylinder ACED125X110B the Right Cylinder?
At 125 mm this is the top of the ACED range: 5890.5 N at 0.5 MPa and 8246.7 N at 0.7 MPa, equal in both directions. Step down to the ACED100 (3769.9 N at 0.5 MPa) for lighter clamping, or stay here when a 300 kg vertical lift with margin is the target. The 110 mm stroke sits well inside the 300 mm maximum standard stroke for this bore, so it ships as a standard build. Remember the piston drifts if air is lost - add a rod lock or pilot check valve where a held load matters. The through-rod resists rotation and can carry a sensor flag on the rear end; order the -S magnet variant if CMSE / DMSE switching is planned.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED125X110B FAQ
Because a rod exits both covers, force is equal in both directions: 5890.5 N at 0.5 MPa and 8246.7 N at 0.7 MPa, on the rod-side area each way. The maximum rating at 1.0 MPa is 1201.3 kgf. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s, air filtered to 40 um, -20 to +70 C.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 125 mm bore fits shallow press frames and gantries. The B code gives a male rod thread for direct tooling attachment, and FA/FB flange, LB foot or FTC brackets bolt to the standard face. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the optional -S magnet enables CMSE / DMSE switches - without -S no magnet is fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED125X110B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.