Airtac ACED Double-acting Compact Cylinder ACED16X75SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED16X75SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø16mm bore and 75mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ16 mm
- Stroke75 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM4×0.7
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED16X75SB
The ACED16X75SB is a double acting compact cylinder built to the ISO 21287 short-body format, with a piston rod leaving BOTH covers so the through-rod delivers 75.4 N in each direction at 0.5 MPa (105.6 N at 0.7 MPa) - identical push and pull, since both strokes work on the rod-side area. The male rod thread (B code) bolts straight to your tooling, and the 75 mm stroke sits at the maximum standard stroke for a 16 mm bore, so no made-to-order surcharge applies.
The hard-anodized aluminium body with an S45C hard-chrome-plated 8 mm rod runs at 0.15-1.0 MPa (22-145 psi) and 30-500 mm/s, with a fixed TPU bumper at each end absorbing end-of-stroke shock. Because the body saves roughly 50% of the mounting length of an ISO 15552 profile cylinder, it slots into tight fixtures where a full-length body cannot. In practical terms the through-rod lifts about 4 kg vertically with a 2:1 margin (7.7 kgf raw at 0.5 MPa), and planning around 45 N of real work keeps the actuator comfortably inside its rating. This model carries the optional -S magnet, so CMSE or DMSE switches can be clipped onto the body for end-of-stroke signalling.
Airtac ACED Double-acting Compact Cylinder ACED16X75SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED16X75SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø16 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M4×0.7 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 75 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø16mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 75 N |
| 0.7 MPa | 106 N |
| Max (@1.0 MPa) | 15 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED16X75SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 16 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED16X75SB Is Used
Fixture clamping on CNC jigs
The symmetric through-rod clamps small aluminium brackets from either side of a machining jig, with the male rod thread taking a custom clamp pad and the 75.4 N output matching light-duty holding.
Push-off on electronics assembly lines
A back-end rod carries a sensor flag while the front rod nudges PCB trays off a conveyor at 30-500 mm/s; CMSE switches on the -S magnet confirm each completed stroke.
Lab sample handling gantry
The short ISO 21287 body fits inside a compact sample-transfer gantry, lifting vials of about 4 kg equivalent vertical load with a 2:1 margin, and the through-rod resists rotation on the pick head.
Is the Airtac ACED Double-acting Compact Cylinder ACED16X75SB the Right Cylinder?
For this force class, 75.4 N at 0.5 MPa suits light clamping, sorting and small-part transfer. Step down to ACED12 (42.4 N) if space and load allow, or up to ACED20 (117.8 N) if you need more headroom. Note that a plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. The 75 mm stroke is the maximum standard for bore 16; longer strokes are made to order. Mounting brackets (FA/FB flange, LB foot, FTC) plus I and Y rod knuckles bolt directly to the ISO 21287 face.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED16X75SB FAQ
Yes - this is a double-rod cylinder, so a rod exits both covers and every stroke uses the rod-side area. Force is 75.4 N at 0.5 MPa and 105.6 N at 0.7 MPa, equal push and pull, with a maximum of 15.4 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome-plated 8 mm rod, threaded aluminium covers and a fixed TPU bumper at each end - the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder. This model carries the optional -S magnet, so CMSE or DMSE reed or solid-state switches mount directly in the body slots; models ordered without the S code have no magnet.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED16X75SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.