Airtac ACED Double-acting Compact Cylinder ACED25X30SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED25X30SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø25mm bore and 30mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ25 mm
- Stroke30 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED25X30SB
The ACED25X30SB is a double acting, double-rod compact cylinder built to the ISO 21287 short-body format. A 10 mm hard-chrome-plated S45C rod exits BOTH covers, so the 25 mm bore delivers 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa in each direction - both strokes work on the rod-side area, so push and pull are identical. The B code gives a male rod thread, and the S code means the magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clamped straight onto the body slots.
The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why this bore suits tight jigs, guarding and gantry slides. Practical sizing: keep real work near 124 N at 0.5 MPa, and treat it as lifting about 10 kg vertically with a 2:1 margin. A fixed TPU bumper at each end absorbs end-of-stroke energy, speed runs 30-500 mm/s, and the through-rod resists rotation while the rear rod can carry a sensor flag.
Airtac ACED Double-acting Compact Cylinder ACED25X30SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED25X30SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 30 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED25X30SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 25 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED25X30SB Is Used
Symmetric jig clamping
The 30 mm stroke and equal 206.2 N force in both directions let one ACED25X30SB clamp and release a machined aluminium bracket with identical pressure each way.
Position-verified ejector
With the fitted magnet and CMSE switches at both ends, a small-parts ejector on an electronics assembly line confirms extend and retract at 30-500 mm/s.
Balanced push-pull slide
A packaging machine reciprocating guide uses the through-rod on both covers so the slide is guided symmetrically and resists rotation without extra hardware.
Is the Airtac ACED Double-acting Compact Cylinder ACED25X30SB the Right Cylinder?
Step down to ACED20X30SB if 117.8 N at 0.5 MPa covers the job, or step up to ACED32X30SB for 345.6 N. Remember this is not a position holder: if the load must stay put when air is lost, add a rod lock or pilot check valve. Mount with FA/FB flange, LB foot, CA/CB clevis or FTC brackets plus I/Y rod knuckles on the ISO 21287 face, and order PT ports as standard or G on request. This unit already carries the optional -S magnet for CMSE / DMSE switching.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED25X30SB FAQ
Yes - the double-rod design means both strokes use the rod-side area. At 0.5 MPa you get 206.2 N each way, at 0.7 MPa 288.6 N each way, and the maximum at 1.0 MPa is 42.0 kgf. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure.
S means the optional magnet is fitted on this model, so CMSE / DMSE switches can be mounted in the body slots; B means a male rod thread instead of female. The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, with a fixed TPU bumper at each end and FA/FB, LB, CA/CB or FTC mounting options.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED25X30SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.