Airtac ACED Double-acting Compact Cylinder ACED25X35S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED25X35S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø25mm bore and 35mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ25 mm
- Stroke35 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED25X35S
The ACED25X35S is a double acting, double-rod compact cylinder built to ISO 21287: a piston rod exits both covers, so the 25 mm bore delivers an identical 206.2 N at 0.5 MPa (288.6 N at 0.7 MPa) in each direction. The S in the code means the optional -S magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clipped onto the body slot for end-of-stroke sensing.
The hard-anodized aluminium body with an S45C hard-chrome-plated rod runs on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), 30-500 mm/s, and carries a fixed TPU bumper at both ends. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it slots into tight jigs and guarding. As a rule of thumb, plan on roughly 123 N of usable work force, and the through-rod will lift about 10 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED25X35S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED25X35S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED25X35S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 25 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED25X35S Is Used
Symmetric clamp on a CNC fixture
The through-rod clamps a machined aluminium housing from both sides with an equal 206.2 N at 0.5 MPa, and the fitted magnet signals clamp-complete to the PLC via a CMSE switch.
Pusher on a packaging line
A 35 mm stroke nudges cartons sideways on a conveyor at 30-500 mm/s; the back-end rod carries a sensor flag so the DMSE switch confirms retract without extra hardware.
Lab pick-and-place slide
The double rod resists rotation on a small vertical lift of about 10 kg with a 2:1 margin, and the compact body fits inside a benchtop gantry where a full-length profile cylinder will not.
Is the Airtac ACED Double-acting Compact Cylinder ACED25X35S the Right Cylinder?
At 206.2 N per side, this 25 mm bore sits between the 20 mm size (117.8 N at 0.5 MPa) and the 32 mm size (345.6 N at 0.5 MPa), so step up if your tooling needs more grip force. The 35 mm stroke is well inside the 150 mm maximum standard stroke for bore 25. Remember that a plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check if the load must stay put. Mount with FA/FB flange, LB foot or FTC brackets and I/Y rod knuckles on the ISO 21287 face; the female M6x1.0 rod thread and PT ports suit standard fittings.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED25X35S FAQ
The 25 mm double-rod design gives 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa, equal in both directions because both strokes use the rod-side area; at 1.0 MPa the maximum is 42.0 kgf. The -S magnet is fitted on this model, so CMSE or DMSE reed and solid-state switches mount in the body slot. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, speed 30-500 mm/s, port M5x0.8, female M6x1.0 rod thread.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it suits tight jigs, guards and gantries. A fixed TPU bumper at both ends absorbs end-of-stroke energy; it is not adjustable and it never holds or brakes a load, so use a rod lock or pilot check where position must be kept with air off. FA/FB flange, LB foot and FTC brackets plus I/Y knuckles bolt straight to the standard face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED25X35S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.