Airtac ACED Double-acting Compact Cylinder ACED25X60B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED25X60B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø25mm bore and 60mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ25 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED25X60B
A double acting compact cylinder with a rod leaving both covers, the ACED25X60B pushes with the same 206.2 N in each direction at 0.5 MPa because both strokes work on the rod-side area. The 25 mm bore sits in the mid-light force class, and the male rod thread from the B code bolts straight to your tooling. Running on 0.15-1.0 MPa (22-145 psi) with a 30-500 mm/s speed band, it suits fast, symmetric push-pull motions.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and gantries. The through-rod resists rotation and side load, and the rear rod can carry a sensor flag. A fixed TPU bumper at each end absorbs end-of-stroke shock. With the 206.2 N rating, plan on roughly 123 N (about 12.6 kg) of real work per direction, which lifts roughly 6 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED25X60B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED25X60B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED25X60B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED25X60B Is Used
Synchronized push-pull transfer
Equal 206.2 N force in both directions lets one cylinder clamp a PCB fixture on the forward stroke and eject it on the return, with the 60 mm stroke matching typical tray pitch.
Compact jig clamping
The short ISO 21287 body fits inside a welding jig arm where a full-length profile cylinder would foul the clamp arm, and the male rod thread takes a standard clamp tip.
Bidirectional divert on packaging lines
A rod at each end gives a symmetric mount for center-guided diverters on a bottling conveyor, with the rear rod available to drive a flag for a proximity sensor.
Is the Airtac ACED Double-acting Compact Cylinder ACED25X60B the Right Cylinder?
At 206.2 N per direction at 0.5 MPa, this bore handles light clamping and synchronized push-pull tasks. Step down to ACED20 (117.8 N) for smaller loads, or up to ACED32 (345.6 N) when the part gets heavier. The 60 mm stroke sits well inside the 150 mm standard range for bore 25. Choose the -S code if you later need CMSE or DMSE switches - this unit has no magnet. Note that the piston drifts if air is lost, so add a rod lock or pilot check for held loads. FA/FB flange, LB foot, CA clevis and FTC brackets bolt to the ISO 21287 face.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED25X60B FAQ
Yes - the double-rod design means both strokes use the rod-side area, so output is equal both ways: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa, with a maximum of 42.0 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) and speed is 30-500 mm/s.
It is an ISO 21287 compact cylinder with a hard-anodized aluminium body, S45C hard-chrome plated rod, M5x0.8 ports and a fixed TPU bumper at each end, about 50% shorter in mounting length than an ISO 15552 profile cylinder. Sensing requires the optional -S magnet code; this model has no magnet, so order ACED25X60BS to use CMSE or DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED25X60B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.