Airtac ACED Double-acting Compact Cylinder ACED25X60SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED25X60SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø25mm bore and 60mm stroke, M5×0.8 air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ25 mm
- Stroke60 mm
- Port sizeM5×0.8
- Acting typeDouble acting, double rod
- Rod threadM6×1.0
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED25X60SB
A double acting compact cylinder built to ISO 21287, the ACED25X60SB pushes a 10 mm rod out of BOTH covers, so the 25 mm bore delivers 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa in either direction - both strokes work on the rod-side area. The male rod thread (B code) bolts straight to tooling, and the fitted magnet accepts CMSE / DMSE switches for end-of-stroke sensing.
The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight jigs and gantries. The through-rod resists rotation and side load and gives a symmetric mount, while fixed TPU bumpers at each end absorb end-of-stroke shock. For planning: at 0.5 MPa the rod-side force of 206.2 N corresponds to roughly 21 kgf, so a 10 kg vertical lift leaves a comfortable 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED25X60SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED25X60SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø25 mm |
| Stroke | 60 mm |
| Acting type | Double acting, double rod |
| Port size | M5×0.8 |
| Rod thread | M6×1.0 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 150 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø25mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 206 N |
| 0.7 MPa | 289 N |
| Max (@1.0 MPa) | 42 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED25X60SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 25 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED25X60SB Is Used
Push-pull fixture clamping
The equal 206.2 N force in both directions clamps and releases a machined housing with identical grip, and the male rod thread takes a custom clamp tip directly.
Bidirectional part diverter
A rod on each cover lets one cylinder push cartons off a conveyor from either face without reversing plumbing, at line speeds up to 500 mm/s.
Gantry Z-axis lift with position feedback
The fitted magnet drives CMSE or DMSE switches at both ends of the 60 mm stroke, confirming pick and place on a small electronics assembly gantry.
Is the Airtac ACED Double-acting Compact Cylinder ACED25X60SB the Right Cylinder?
At 206.2 N per direction, this 25 mm unit sits between the 20 mm bore (117.8 N at 0.5 MPa) and the 32 mm bore (345.6 N at 0.5 MPa) - step up if your fixture needs over 200 N of working force. The 60 mm stroke is well inside the 150 mm maximum standard stroke for this bore. Remember the piston will drift if air is lost; add a rod lock or pilot check valve where a load must be held. FA/FB flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the ISO 21287 face, and the fitted magnet works with CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED25X60SB FAQ
Yes - the double-rod design means both strokes use the rod-side area, so output is equal either way: 206.2 N at 0.5 MPa and 288.6 N at 0.7 MPa, with a maximum of 42.0 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 60 mm stroke is within the 150 mm standard limit for a 25 mm bore.
This model carries the optional -S magnet, so CMSE reed or DMSE solid-state switches mount in the body slots to signal stroke ends. FA/FB flanges, LB foot and FTC brackets plus I and Y rod knuckles attach to the ISO 21287 mounting face. The fixed TPU bumper at each end decelerates the piston at stroke ends; it does not hold or brake a load, so use a rod lock or pilot check where position must be kept.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED25X60SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.