Airtac ACED Double-acting Compact Cylinder ACED32X10B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X10B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X10B
The ACED32X10B is a double acting, double-rod compact cylinder built to the ISO 21287 short-body format, with a 32 mm bore and a 10 mm stroke. A 12 mm piston rod exits both covers, so the output force is equal in both directions - 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa on either stroke, because both sides work on the rod-side area. The B code gives a male rod thread at each end, and the air port is 1/8" PT. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure, running at 30-500 mm/s.
The hard-anodized aluminium body pairs with an S45C hard-chrome-plated rod, and a fixed TPU bumper at each end absorbs end-of-stroke impact. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which makes this 10 mm stroke version a good fit for clamping nests and slide fixtures where every millimetre of length counts. For usable sizing, plan on roughly 207 N of real work at 0.5 MPa - about 21 kg held vertically with a 2:1 margin. FA/FB flanges, LB feet and FTC brackets bolt straight to the ISO 21287 face, and the optional -S magnet enables CMSE / DMSE switches; this unit has no magnet fitted.
Airtac ACED Double-acting Compact Cylinder ACED32X10B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X10B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X10B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X10B Is Used
Press-fit clamp nests
The 10 mm stroke and 345.6 N both-ways force suit short-travel press or clamp nests on electronics assembly benches, where the compact body fits under a shallow guard.
Symmetric slide actuation
With a rod at each cover, the cylinder can push a small indexing slide from either side with equal 483.8 N at 0.7 MPa, keeping the mount symmetric on compact transfer units.
Fixture ejector pins
On machining fixtures, the rear rod can carry an ejector plate while the front rod does the work, all within the 50%-shorter length of an ISO 15552 profile cylinder.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X10B the Right Cylinder?
At 345.6 N per direction at 0.5 MPa, the 32 mm bore sits between the 25 mm bore (206.2 N) and the 40 mm bore (571.8 N) - step down for lighter clamps, up when the tooling needs nearly double the thrust. The 10 mm stroke is well inside the 200 mm maximum standard stroke for this bore, so it ships as a standard build. The through-rod resists rotation and lets the rear rod carry a fixture or sensor flag, but the piston will drift if air is lost - add a rod lock or pilot check where a load must be held. Order the -S code if CMSE / DMSE position sensing is needed, and match FA, LB or FTC mounting to your fixture.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X10B FAQ
Yes - the double-rod design means both strokes use the rod-side area, so force is equal both ways: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a maximum of 70.5 kgf at 1.0 MPa. A practical working figure is about 207 N, roughly 21 kg held vertically with a 2:1 margin. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof 1.5 MPa (215 psi), speed 30-500 mm/s, port 1/8" PT, rod 12 mm with male thread (B code).
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits tight jigs and gantries. Position sensing requires the optional -S magnet code - this ACED32X10B has no magnet fitted, so no switch can be mounted unless you order -S, which then accepts CMSE or DMSE switches. A fixed TPU bumper at each end absorbs end-of-stroke impact, and FA/FB flange, LB foot or FTC mounting bolts to the standard ISO 21287 face.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X10B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.