Airtac ACED Double-acting Compact Cylinder ACED32X10SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X10SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 10mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke10 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X10SB
The ACED32X10SB is a double acting, double-rod compact cylinder built to the ISO 21287 short-body format. A 12 mm hard-chrome-plated S45C rod exits BOTH covers, so the through-rod resists rotation and side load and the output force is EQUAL in both directions: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa on every stroke, since both sides work on the rod-side area. The male rod thread (B code) bolts straight to tooling, and the fitted -S magnet accepts CMSE / DMSE reed or solid-state switches for end-of-stroke sensing.
The hard-anodized aluminium body with roller-burnished bore saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it drops into tight jigs and gantries. A fixed TPU bumper at each end absorbs end-of-stroke energy, ports are 1/8" PT, and speed runs 30-500 mm/s at 0.15-1.0 MPa (22-145 psi). As a rule of thumb, plan on roughly 207 N of usable work at 0.5 MPa, which lifts about 17 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED32X10SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X10SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 10 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X10SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×10 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X10SB Is Used
Short-stroke clamping on CNC fixtures
The 10 mm stroke and 345.6 N both-ways force clamp or release machined parts in a milling fixture, with the male rod thread picking up the clamp arm directly.
Push-off station on an electronics assembly line
Equal force in both directions ejects finished PCB trays forward and returns the tooling with the same 345.6 N at 0.5 MPa, keeping cycle timing symmetric at 30-500 mm/s.
Position-verified gate in a packaging machine
The fitted -S magnet drives CMSE / DMSE switches so the PLC confirms the gate is fully open and fully closed, while the compact body fits the narrow guard frame.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X10SB the Right Cylinder?
At 10 mm stroke this is a short-throw clamp or eject model: the 32 mm bore gives 345.6 N both ways at 0.5 MPa, while a 25 mm bore delivers only 206.2 N and a 40 mm bore reaches 571.8 N - size up if your part weight or clamp force needs more. The through-rod suits symmetric fixtures and the rear rod can carry a sensor flag. Note that like any plain double-rod cylinder it will drift if air is lost; add a rod lock or pilot check where a load must be held. FA/FB flange, LB foot and FTC brackets bolt to the ISO 21287 face, and this unit already carries the -S magnet for CMSE / DMSE switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X10SB FAQ
Yes - it is a double-rod cylinder, so a rod exits both covers and both strokes use the rod-side area. Output is 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa in EITHER direction, with a maximum of 70.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um, temperature -20 to +70 C.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it fits where a full-length body will not. A fixed TPU bumper at each end absorbs end-of-stroke energy; it is not adjustable and it never locks or holds a load - for a held load add a rod lock or pilot check. Mounting is via FA/FB flange, LB foot or FTC brackets on the standard ISO 21287 face, and this model carries the optional -S magnet for CMSE / DMSE switches.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X10SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.