Airtac ACED Double-acting Compact Cylinder ACED32X110
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X110 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X110
A double acting compact cylinder built to ISO 21287, the ACED32X110 pushes a 32 mm bore through a 110 mm stroke with a piston rod leaving BOTH covers. Because each side works on the rod-side area, output is identical in either direction: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa. The through-rod resists rotation and modest side load, and the rear rod makes a handy carrier for a sensor flag.
The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding where a full-length body cannot. Fixed TPU bumpers absorb end-of-stroke shock at both ends, the S45C hard-chrome rod stands up to cycling, and the 1/8" ports take PT fittings. Run it 0.15-1.0 MPa (22-145 psi) at 30-500 mm/s. As a rule of thumb, keep real work near 207 N, which is roughly 21 kg of horizontal push with margin.
Airtac ACED Double-acting Compact Cylinder ACED32X110 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X110 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X110
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X110 Is Used
Symmetric part ejection
The equal 345.6 N force in both directions suits a punch-press die station where a formed bracket must be pushed off the tool on the return stroke with the same authority as the advance.
Reciprocating conveyor pusher
A packaging line indexing cartons across a belt benefits from the through-rod: the rear rod drives a position flag while the front rod pushes, both at 483.8 N at 0.7 MPa.
Clamp fixture on a CNC jig
With about 21 kg of practical horizontal clamping effort and a 110 mm opening stroke, the short body fits inside the fixture footprint of a machining centre jig.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X110 the Right Cylinder?
At 345.6 N per direction this bore sits between the 25 mm ACED (206.2 N) and the 40 mm ACED (571.8 N), so step down for lighter clamps or up for heavier presses. The 110 mm stroke is well inside the 200 mm standard limit for bore 32. Note that a plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check if the load must stay put. FA/FB flange, LB foot and FTC brackets plus I/Y rod knuckles bolt to the ISO 21287 face. This code has no magnet; order the -S version if you need CMSE / DMSE switch sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X110 FAQ
Yes - the double-rod design means both strokes use the rod-side area, so output is equal either way: 345.6 N at 0.5 MPa, 483.8 N at 0.7 MPa, and a maximum of 70.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi) with proof pressure of 1.5 MPa (215 psi), speed 30-500 mm/s, air filtered to 40 um.
It is an ISO 21287 compact cylinder whose hard-anodized aluminium body is about 50% shorter in mounting length than an ISO 15552 profile cylinder, with fixed TPU bumpers at both ends to soften stroke ends. FA/FB flanges, LB foot and FTC brackets plus I/Y knuckles mount on the standard face. Sensing needs the optional -S magnet code, which then accepts CMSE / DMSE switches; this version (no S) carries no magnet. Rod end is female M8x1.25, ports are 1/8" PT.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X110
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.