Airtac ACED Double-acting Compact Cylinder ACED32X110B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X110B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 110mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke110 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X110B
A double acting compact cylinder built to ISO 21287, the ACED32X110B pushes a 12 mm through-rod out of BOTH covers, so the 32 mm bore delivers an identical 345.6 N at 0.5 MPa (483.8 N at 0.7 MPa) on every stroke. The male rod thread (B code) bolts straight to your tooling, and the fixed TPU bumper at each end absorbs end-of-stroke shock. Air supply is 0.15-1.0 MPa (22-145 psi) with speed from 30-500 mm/s.
The hard-anodized aluminium body with an S45C hard-chrome plated rod shrugs off wear in daily production, and the short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder - handy inside tight guarding or slide tables. Because both sides see the rod-side area, plan on roughly 207 N of usable work at 0.5 MPa, which lifts about 17 kg vertically with a 2:1 margin. FA/FB flanges, LB feet and FTC brackets mount directly; note this unit has no magnet, so CMSE / DMSE switches need the optional -S code.
Airtac ACED Double-acting Compact Cylinder ACED32X110B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X110B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 110 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X110B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×110 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X110B Is Used
Reciprocating transfer slide
The symmetric through-rod drives a parts carrier back and forth between two stations at up to 500 mm/s, with equal 345.6 N thrust in each direction so cycle time stays identical both ways.
Press-fit stamping nest
A 110 mm stroke closes the gap to a small press nest, and the 207 N usable force at 0.5 MPa seats bearings or bushings in light-duty assembly jigs.
Flag-driven position check
The rear rod carries a flag past a CMSE or DMSE switch (order the -S code) to confirm full retraction on an automated gating station.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X110B the Right Cylinder?
At 345.6 N per direction this 32 mm bore suits clamping and reciprocating slides up to about 20 kg moving mass. Step down to the 25 mm bore (206.2 N at 0.5 MPa) for lighter pick-and-place, or up to the 40 mm bore (571.8 N) when the load grows. The through-rod resists rotation and carries a sensor flag on the rear end. Remember: with no -S magnet fitted there is no position sensing, and a plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check if the load must hold.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X110B FAQ
Because a rod exits both covers, force is equal in both directions: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a peak of 70.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, temperature -20 to +70 C, on air filtered to 40 um.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end decelerates the piston at stroke ends. Mounting uses FA/FB flanges, LB feet or FTC brackets on the standard face. Position sensing requires the optional -S magnet code with CMSE / DMSE switches; this model, ordered without -S, has no magnet fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X110B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.