Airtac ACED Double-acting Compact Cylinder ACED32X125SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X125SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 125mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke125 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X125SB
A double acting, double-rod compact cylinder built to ISO 21287, the ACED32X125SB pushes a 12 mm hard-chrome rod out of BOTH covers, so thrust is identical on each stroke: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa. The male rod thread (B code) suits external nuts and knuckles, and the 1/8" PT port feeds air filtered to 40 um across a 0.15-1.0 MPa (22-145 psi) operating band.
The short hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters on a 125 mm stroke inside a tight fixture. Plan on roughly 207 N of usable work at 0.5 MPa, about 21 kg of vertical force with margin. The through-rod resists rotation and side load, the rear rod can carry a sensor flag, and the fitted -S magnet lets CMSE / DMSE switches report position. Speed range is 30-500 mm/s with a fixed TPU bumper at each end.
Airtac ACED Double-acting Compact Cylinder ACED32X125SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X125SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 125 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X125SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×125 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X125SB Is Used
Reciprocating transfer slide
The through-rod drives a slide equally in both directions at 345.6 N per stroke, ideal for shuttling PCB trays between two conveyor stops on a 125 mm pitch.
Position-verified clamping fixture
With the fitted magnet and CMSE switches on both ends, a machining fixture confirms open and closed clamp states before the spindle starts.
Symmetric tensioning arm
A rear rod on a packaging machine's web-tension arm mirrors the front rod, giving balanced 483.8 N forces at 0.7 MPa without a second cylinder.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X125SB the Right Cylinder?
At 345.6 N per side, this bore sits between the 25 mm size (206.2 N at 0.5 MPa) and the 40 mm size (571.8 N at 0.5 MPa), so pick it when 25 mm is marginal and 40 mm is oversized. The 125 mm stroke is inside the 200 mm standard range for bore 32, so no made-to-order build is needed. FA/FB flanges, LB feet and FTC brackets bolt to the ISO 21287 face, and I/Y rod knuckles suit the male thread. Because the piston drifts when air is lost, add a rod lock or pilot check if the load must stay put.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X125SB FAQ
Because a rod exits both covers, output is equal both ways: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa on each stroke, peaking at 70.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, and speed runs 30-500 mm/s.
The ISO 21287 body is roughly 50% shorter in mounting length than an ISO 15552 profile cylinder, so a 125 mm stroke fits shallow gantries. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches can be clipped anywhere along the body slots; a fixed TPU bumper at each end absorbs end-of-stroke shock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X125SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.