Airtac ACED Double-acting Compact Cylinder ACED32X150S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X150S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 150mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke150 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X150S
The ACED32X150S is a double acting, double-rod AirTAC compact cylinder built to ISO 21287: a 32 mm bore with a 150 mm stroke and a 12 mm rod leaving BOTH covers, so the through-rod gives equal force in each direction (rod-side area) and resists rotation and side load. At 0.5 MPa it delivers 345.6 N either way, and 483.8 N at 0.7 MPa. The S in the code means the optional magnet is fitted, so CMSE or DMSE reed and solid-state switches can be clipped onto the body slot for end-of-stroke sensing.
The hard-anodized aluminium body with a roller-burnished bore and an S45C hard-chrome-plated rod shrugs off wear, while the short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder - handy in tight guards and gantries. A fixed TPU bumper at each end absorbs end-of-stroke shock, the back-end rod can carry a sensor flag, and speed runs 30-500 mm/s. As a sizing guide, the 345.6 N rating translates to roughly 35 kg of vertical lift, or about 17 kg if you keep a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED32X150S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X150S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 150 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X150S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X150S Is Used
Fixture clamping on CNC pallets
The symmetric through-rod clamps a machined housing from both sides with 345.6 N each way at 0.5 MPa, and the 150 mm stroke clears pallet change-over.
Pusher on a bottling line
A rod exiting both covers lets the back rod carry a sensor flag while the front rod nudges bottles sideways; the fitted magnet feeds CMSE switch signals to the PLC.
Lift-and-present gantry station
With about 35 kg of vertical lift equivalent at 0.5 MPa, the double rod resists the twist of an offset tray, and DMSE switches confirm top and bottom positions.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X150S the Right Cylinder?
At 345.6 N per direction at 0.5 MPa, this 32 mm bore suits clamping and positioning loads up to roughly 200 N in continuous work. Step down to ACED25 (206.2 N) for lighter tooling, or up to ACED40 (571.8 N) if the part weight grows. The 150 mm stroke sits inside the 200 mm standard range for this bore, so no made-to-order build is needed. FA/FB flange, LB foot and FTC brackets bolt to the ISO 21287 face, and I/Y rod knuckles suit the 12 mm rod. Remember it is a plain double-rod cylinder: if the load must stay put when air is lost, add a rod lock or pilot check valve. Air supply: 0.15-1.0 MPa (22-145 psi), filtered to 40 um.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X150S FAQ
Because a 12 mm rod exits both covers, output is equal both ways: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa per direction, peaking at 70.5 kgf at 1.0 MPa. There is no push-versus-pull difference - both strokes use the rod-side area. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure.
This model carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches mount directly in the body slots. Each end of the stroke is decelerated by a fixed TPU bumper - it only absorbs end-of-travel energy and is not adjustable. The compact ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and FA/FB flange, LB foot and FTC brackets bolt straight on. If the load must hold when air is lost, add a rod lock or pilot check.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X150S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.