Airtac ACED Double-acting Compact Cylinder ACED32X175
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X175 is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 175mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke175 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X175
The ACED32X175 is a double acting, double-rod compact cylinder built to the ISO 21287 short-body format. A 12 mm hard-chrome-plated S45C rod exits BOTH covers, so the 32 mm bore delivers an identical 345.6 N at 0.5 MPa (483.8 N at 0.7 MPa) on every stroke, and the through-rod resists rotation and side load while the rear rod can carry a sensor flag. The body is hard-anodized aluminium with roller-burnished bore, and fixed TPU bumpers absorb end-of-stroke energy at both covers.
Because the short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, this 175 mm stroke unit slots into tight jigs, guarding and gantry frames that a full-length cylinder cannot reach. For sizing, treat roughly 0.6 of the 345.6 N figure as usable work at 0.5 MPa, which is about 21 kg of vertical lift capability with margin. Speed range is 30-500 mm/s, operating pressure 0.15-1.0 MPa (22-145 psi). Note there is no magnet fitted on this code; order the optional -S version if you need CMSE / DMSE switch detection.
Airtac ACED Double-acting Compact Cylinder ACED32X175 Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X175 |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 175 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X175
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X175 Is Used
Reciprocating transfer slide
The through-rod gives a symmetric mount on both faces of a pick-and-place slide, with equal 345.6 N force whether pushing parts into a nest or retracting the carrier at 30-500 mm/s.
Opposed press or forming station
A rod on each end lets one ACED32X175 actuate two opposing punches or clamp pads in a small electronics fixture, delivering 483.8 N at 0.7 MPa in both directions simultaneously.
Flag-driven position feedback
On a packaging machine gate, the rear rod carries a proximity flag while the front rod does the work; order the -S code to enable CMSE / DMSE switches for end-of-stroke confirmation.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X175 the Right Cylinder?
At 345.6 N per direction, the 32 mm bore sits between the 25 mm bore (206.2 N at 0.5 MPa) and the 40 mm bore (571.8 N at 0.5 MPa), so pick 32 when your clamp or transfer load falls in the 200-350 N band. The 175 mm stroke is within the 200 mm maximum standard stroke for this bore, so no made-to-order build is required. Choose the female M8x1.25 rod thread as coded here, or add B for a male thread. Mount with FA/FB flange, LB foot or FTC brackets plus I/Y rod knuckles on the ISO 21287 face. Remember this cylinder drifts when air is lost; for a held load pair it with a rod lock or pilot check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X175 FAQ
Yes. Because a rod exits both covers, both strokes use the rod-side area, so force is equal both ways: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a maximum of 70.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the 1/8" port size applies at this 32 mm bore.
It is an ISO 21287 compact cylinder whose short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so a 175 mm stroke still fits shallow machine frames. Fixed TPU bumpers at both ends absorb end-of-stroke shock. This base code has no magnet, so no switch can be read; order the optional -S magnet version to run CMSE or DMSE reed or solid-state switches along the body slots.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X175
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.