Airtac ACED Double-acting Compact Cylinder ACED32X200B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X200B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 200mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke200 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X200B
A double acting compact cylinder built to ISO 21287, the ACED32X200B pushes a 12 mm hard-chrome rod out of BOTH covers, so thrust is identical on every stroke: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, whichever way the piston moves. The male rod thread (B code) on each end bolts straight to tooling, and the fixed TPU bumper at each cover absorbs end-of-stroke shock. Speed range is 30-500 mm/s on air filtered to 40 um.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which matters on a 200 mm stroke where every millimetre of envelope counts in a jig or gantry. With 345.6 N available, plan roughly 207 N (about 21 kg) of real work at 0.5 MPa, or match it to a vertical lift of around 17 kg with a 2:1 margin. FA/FB flanges, LB feet and FTC brackets mount on the standard face, and the optional -S magnet enables CMSE / DMSE switches - without -S there is no magnet fitted.
Airtac ACED Double-acting Compact Cylinder ACED32X200B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X200B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X200B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X200B Is Used
Symmetric weld fixture clamping
The through-rod lets a clamp arm ride on the front rod while the rear rod carries a position flag, with 345.6 N holding force identical on clamp and release strokes.
Push-pull parts transfer
Equal force both ways makes this unit ideal for sliding pallets or trays between two stations on a small automation line at up to 500 mm/s.
Press-fit ejection station
Around 21 kg of usable thrust at 0.5 MPa ejects finished bushings or pins from a shallow die, with the 200 mm stroke clearing the part fully.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X200B the Right Cylinder?
At 345.6 N per direction this bore 32 unit suits clamping and transfer tasks in the 20-30 kg class; step down to ACED25X200B (206.2 N) for lighter fixtures or up to ACED40X200B (571.8 N) when the load grows. Because it is double acting with no lock, a rod lock or pilot check valve is needed if the load must hold when air is lost. Choose the B male thread for direct tooling attachment, PT ports as standard (G on request), and add the -S code if CMSE / DMSE position sensing is planned.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X200B FAQ
Yes - because a rod exits both covers, both strokes use the rod-side area, so force is equal either way: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a maximum of 70.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) and proof pressure is 1.5 MPa (215 psi).
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke shock. Position sensing requires the optional -S magnet ordered with the cylinder; only then can CMSE or DMSE switches be clipped to the body slots.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X200B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.