Airtac ACED Double-acting Compact Cylinder ACED32X25SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X25SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 25mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke25 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X25SB
A double acting compact cylinder with a rod through both covers, the ACED32X25SB delivers 345.6 N at 0.5 MPa in EACH direction, because both strokes work on the rod-side area. At 0.7 MPa that rises to 483.8 N either way, with a peak of 70.5 kgf at 1.0 MPa. The B code gives a male rod thread on both ends, and the fitted -S magnet accepts CMSE / DMSE switches for end-of-stroke sensing.
The hard-anodized aluminium body with a roller-burnished bore carries an S45C hard-chrome plated rod, and a fixed TPU bumper at each end absorbs end-of-stroke shock. As an ISO 21287 compact build it saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding. A practical planning figure: treat roughly 207 N (about 21 kg vertical) as your usable working force at 0.5 MPa, leaving margin for friction and pressure drop. Speed range is 30-500 mm/s on air filtered to 40 um.
Airtac ACED Double-acting Compact Cylinder ACED32X25SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X25SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 25 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X25SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×25 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X25SB Is Used
Pick-and-place between fixtures
The 25 mm stroke shuttles small machined brackets between two nests on a CNC tending cell; 345.6 N both ways means the same grip force on approach and return.
Synchronized slide actuation
Male threads on both rods let a packaging machine drive two slides from one cylinder body, keeping equal force and timing on the push and pull stroke.
Position-verified clamping
With the fitted -S magnet, CMSE or DMSE switches confirm full clamp and full retract on an electronics assembly press fixture running at 0.5 MPa.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X25SB the Right Cylinder?
At 32 mm bore you sit mid-range: the 25 mm bore gives 206.2 N at 0.5 MPa and the 40 mm bore reaches 571.8 N, so step up only if your tooling mass demands it. The through-rod resists rotation and light side load, and the rear rod can carry a sensor flag or a second tool. Note that with no air applied the piston drifts freely - for a held vertical load add a rod lock or pilot check valve. Mount with FA/FB flanges, LB feet or FTC brackets plus I/Y rod knuckles on the standard ISO 21287 face; PT ports are standard, order the G option for BSPP.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X25SB FAQ
Yes - the double-rod design means both strokes use the rod-side area, so force is equal each way: 345.6 N at 0.5 MPa, 483.8 N at 0.7 MPa, and a maximum of 70.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, ideal for cramped gantries. This model carries the optional -S magnet, so CMSE / DMSE reed or solid-state switches clip into the body slots; a fixed TPU bumper at each end absorbs end-of-stroke impact.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X25SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.