Airtac ACED Double-acting Compact Cylinder ACED32X30SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X30SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 30mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke30 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X30SB
A double acting compact cylinder built to ISO 21287, the ACED32X30SB pushes a 12 mm rod out of BOTH covers, so thrust is identical on the extend and return stroke: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa. The 32 mm bore delivers up to 70.5 kgf at 1.0 MPa, and the through-rod resists rotation and side load while giving you a symmetric mounting face on either end. The short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which is why it drops into tight jigs and guarded cells where a full-length body simply will not fit.
The hard-anodized aluminium body carries a roller-burnished bore, the S45C hard-chrome-plated rod shrugs off wear, and a fixed TPU bumper absorbs end-of-stroke energy at each cover. Because the -S magnet is fitted on this model, CMSE or DMSE reed and solid-state switches can be clipped into the body slots for end-position sensing. Running on air filtered to 40 um at 0.15-1.0 MPa (22-145 psi), it cycles at 30-500 mm/s across -20 to +70 C. As a working rule, plan on roughly 207 N of usable push at 0.5 MPa, which lifts about 21 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED32X30SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X30SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 30 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X30SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X30SB Is Used
Fixture clamping on CNC pallets
The 345.6 N through-rod clamps aluminium housings in machining jigs, and the 30 mm stroke clears the part quickly inside tight fixture plates.
Pusher arms on packaging lines
Equal force both ways lets one cylinder push cartons off a belt and retract with the same thrust, while CMSE switches confirm each stroke via the fitted magnet.
Lab sample transfer slides
The symmetric double rod drives sample trays between test stations, and the short ISO 21287 body slots under bench guards where longer bodies cannot.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X30SB the Right Cylinder?
Size up or down from here: the ACED25X30 gives 206.2 N at 0.5 MPa if your load is lighter, while the ACED40X30 raises thrust to 571.8 N at 0.5 MPa for heavier tooling. Remember this is a plain double-rod cylinder, so it will drift if air is lost - fit a rod lock or pilot check valve where a load must be held. FA/FB flanges, LB feet and FTC brackets bolt straight to the ISO 21287 face, and I/Y rod knuckles suit the male (B) rod thread. This unit already carries the optional -S magnet, so CMSE / DMSE switches can be added without reordering.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X30SB FAQ
Because a rod exits both covers, force is equal in both directions: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a maximum of 70.5 kgf at 1.0 MPa. Both strokes use the rod-side area, so there is no push-versus-pull difference. Operating pressure is 0.15-1.0 MPa (22-145 psi) with proof pressure of 1.5 MPa (215 psi), and speed runs 30-500 mm/s.
This version carries the optional -S magnet, so CMSE or DMSE reed and solid-state switches mount directly in the body slots to signal extend and retract. Each cover has a fixed TPU bumper that absorbs end-of-stroke energy; it is not adjustable and does not hold a load. Mounting is via FA/FB flanges, LB feet or FTC brackets on the ISO 21287 face, and the male rod thread (B code) accepts I/Y knuckles.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X30SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.