Airtac ACED Double-acting Compact Cylinder ACED32X35SB
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X35SB is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 35mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke35 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X35SB
The ACED32X35SB is a double acting compact cylinder built to ISO 21287, with a piston rod leaving BOTH covers. Because each stroke works on the rod-side area, output is identical in push and pull: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa. The male-threaded 12 mm rod (the B code) bolts straight to your tooling, and the fitted -S magnet lets CMSE / DMSE switches report end positions without any extra bracket work.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarded cells where a full-length body will not fit. A hard-anodized aluminium barrel carries the roller-burnished bore, the S45C rod is hard-chrome plated, and fixed TPU bumpers at each end absorb stroke-end shock. In practice, plan on roughly 207 N of usable work at 0.5 MPa - about 21 kg held vertically with a sensible margin - instead of the full rating.
Airtac ACED Double-acting Compact Cylinder ACED32X35SB Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X35SB |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 35 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X35SB
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X35SB Is Used
Symmetric clamp fixture
The through-rod lets a CNC fixture clamp from either cover with the same 345.6 N at 0.5 MPa, so one valve circuit does both jobs on a machining line.
Pusher with back-side sensor flag
On a packaging conveyor, the rear rod carries a flag for a DMSE switch while the front rod pushes cartons - the fitted -S magnet makes both ends switchable.
Reciprocating guide slide
A 35 mm shuttle on an electronics assembly gantry runs at 30-500 mm/s; the double rod resists rotation and keeps the carrier aligned without external guides.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X35SB the Right Cylinder?
At 35 mm stroke this unit suits short, symmetric moves: clamping, part transfer between stops, or tensioning where equal force both ways matters. If your load needs less, the ACED25X35 delivers 206.2 N at 0.5 MPa; if it needs more, step up to the ACED40X35 for 571.8 N. Remember that a plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check valve if the load must stay put. FA/FB flanges, LB feet and FTC brackets mount on the standard ISO 21287 face, and I/Y rod knuckles suit the male thread.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X35SB FAQ
Output is EQUAL in both directions because a rod exits both covers and both strokes use the rod-side area: 345.6 N at 0.5 MPa, 483.8 N at 0.7 MPa, and up to 70.5 kgf at 1.0 MPa. Operating pressure is 0.15-1.0 MPa (22-145 psi) with 1.5 MPa (215 psi) proof pressure, speed range 30-500 mm/s, air filtered to 40 um, and working temperature -20 to +70 C. The 1/8" port depends only on the 32 mm bore.
It is an ISO 21287 compact cylinder - about 50% shorter in mounting length than an ISO 15552 profile cylinder - with a hard-anodized aluminium body, S45C hard-chrome rod and fixed TPU bumpers at both stroke ends. This model carries the optional -S magnet, so CMSE or DMSE reed / solid-state switches clip into the body slots to signal end positions. FA/FB flange, LB foot and FTC mounting bolt to the standard ISO 21287 face. Note it does not hold position on air loss - use a rod lock or pilot check for a held load.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X35SB
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.