Airtac ACED Double-acting Compact Cylinder ACED32X75B
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X75B is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X75B
The ACED32X75B is a double acting, double-rod compact cylinder built to the ISO 21287 short-body format. A 12 mm hard-chrome-plated S45C rod exits BOTH covers, so output force is equal in both directions - 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa on every stroke, push or pull. Because both sides see the rod-side area, there is no push/pull imbalance to design around.
The through-rod resists rotation and light side load, and the rear rod stub can carry a sensor flag or a symmetric fixture plate. The hard-anodized aluminium body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so it slots into tight jigs and guarding. A fixed TPU bumper at each end absorbs end-of-stroke shock, and the male rod thread (B code) bolts straight to your tooling. As a working figure, plan on roughly 207 N (about 21 kg) of usable push at 0.5 MPa rather than the full 345.6 N rating.
Airtac ACED Double-acting Compact Cylinder ACED32X75B Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X75B |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X75B
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X75B Is Used
Symmetric jig clamping
The equal 345.6 N force in both directions lets one ACED32X75B clamp and release a machining fixture with identical grip, using the male thread to carry a custom clamp tip.
Push-and-return transfer arms
On packaging lines, the through-rod pushes a carton sideways at 0.5 MPa and retracts with the same 345.6 N, so no return spring or separate cylinder is needed.
Flag-driven position check
Mount a flag on the rear rod stub of the 75 mm stroke and, with the optional -S magnet plus a CMSE or DMSE switch, confirm end positions on a gantry pick station.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X75B the Right Cylinder?
At 75 mm stroke this sits well inside the 200 mm maximum standard stroke for the 32 mm bore, so it ships as a catalog item. If your load needs less muscle, the 25 mm bore delivers 206.2 N at 0.5 MPa; if you need more, step up to the 40 mm bore at 571.8 N. Air supply is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof rating, and speed runs 30-500 mm/s.
This version has a male rod thread and PT ports (1/8" on this bore). FA/FB flanges, LB feet and FTC brackets, plus I and Y rod knuckles, bolt to the ISO 21287 face. Note that the piston drifts if air is lost - for a held load add a rod lock or pilot check valve. The magnet is the optional -S code; without it no CMSE / DMSE switch can be fitted, so order ACED32X75BSB if you need position sensing.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X75B FAQ
Yes - the double-rod design exposes the rod-side area on both strokes, so force is equal push and pull: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, with a maximum of 70.5 kgf at 1.0 MPa. Operating range is 0.15-1.0 MPa (22-145 psi), proof pressure 1.5 MPa (215 psi), speed 30-500 mm/s, and the bore is 32 mm with a 12 mm rod on each end.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, and a fixed TPU bumper at each end absorbs end-of-stroke impact. Switches are possible only with the optional -S magnet code - order ACED32X75BSB and CMSE or DMSE sensors clip into the body slots; without -S there is no magnet fitted.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X75B
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.