Airtac ACED Double-acting Compact Cylinder ACED32X75S
The AirTAC Airtac ACED Double-acting Compact Cylinder ACED32X75S is a genuine double acting, double rod ISO 21287 compact air cylinder with a Ø32mm bore and 75mm stroke, 1/8" air ports and a hard-anodized aluminium body. Its short compact envelope saves about 50% of the mounting length of an ISO 15552 profile cylinder.
- BoreØ32 mm
- Stroke75 mm
- Port size1/8"
- Acting typeDouble acting, double rod
- Rod threadM8×1.25
- CushionFixed TPU bumper (both ends)
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac ACED Double-acting Compact Cylinder ACED32X75S
A double acting compact cylinder built to ISO 21287, the ACED32X75S has a piston rod leaving both covers, so its 345.6 N output at 0.5 MPa is identical on the extend and retract strokes. The 32 mm bore runs on 0.15-1.0 MPa (22-145 psi) filtered air at 30-500 mm/s, with a fixed TPU bumper at each end to soften the stop.
The short ISO 21287 body saves about 50% of the mounting length of an ISO 15552 profile cylinder, which makes the 75 mm stroke easy to fit inside tight jigs and guarding. The through-rod resists rotation and light side load, and the rear rod can carry a sensor flag. Because the -S magnet is fitted, CMSE or DMSE switches mount directly on the body slots. As a rule of thumb, plan on roughly 207 N of usable work at 0.5 MPa, which lifts about 17 kg vertically with a 2:1 margin.
Airtac ACED Double-acting Compact Cylinder ACED32X75S Technical Specifications
| Model | Airtac ACED Double-acting Compact Cylinder ACED32X75S |
|---|---|
| Series | ACED compact cylinder |
| Standard | ISO 21287 |
| Bore size | Ø32 mm |
| Stroke | 75 mm |
| Acting type | Double acting, double rod |
| Port size | 1/8" |
| Rod thread | M8×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 500 mm/s |
| Cushion | Fixed TPU bumper (both ends) |
| Max standard stroke | Up to 200 mm |
Specifications follow the official AirTAC ACE-series (ISO 21287) datasheet. Body: hard-anodized aluminium alloy; piston rod: S45C carbon steel with hard-chrome plating. Rod type: female thread (blank) or male thread (B). Thread options: PT (blank) / G. A built-in magnet is OPTIONAL — add the -S code to fit CMSE / DMSE position sensors.
Theoretical Output Force (Ø32mm)
| Pressure | Force (both ways) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
Double-rod: a rod exits both covers, so output force is equal in both directions (rod-side area used).
Model Code: Airtac ACED Double-acting Compact Cylinder ACED32X75S
| ACED | ISO 21287 compact cylinder (double-rod). |
|---|---|
| 32 | Bore size in mm. |
| ×75 | Stroke length in mm. |
| S | Optional built-in magnet for CMSE / DMSE sensors (omit for no magnet). |
| B | Rod type: B = male thread; blank = female thread. |
ACE-family variants: ACE (double acting), ASE / ATE (single acting push / pull), ACED (double rod), ACEJ (adjustable stroke), TACE / TACED (non-rotating twin-guide yoke). Mounting accessories: FA / FB flange, LB foot, CA / CB clevis, CR, SDB pivot, FTC; plus I and Y knuckles. Thread PT (blank) / G.
Where the Airtac ACED Double-acting Compact Cylinder ACED32X75S Is Used
Symmetric clamp fixtures
The equal 345.6 N force in both directions lets one ACED32X75S clamp and release a machined housing in a drilling jig with identical pressure each cycle.
Bi-directional conveyor pusher
A rod on each cover means the same 483.8 N at 0.7 MPa kicks cartons off a line whichever way the piston travels, with the rear rod carrying a position flag.
Lift-and-lower test station
With about 17 kg of vertical lift capacity at a 2:1 margin, the cylinder raises and lowers a small gauge fixture inside a compact QC enclosure.
Is the Airtac ACED Double-acting Compact Cylinder ACED32X75S the Right Cylinder?
At 345.6 N per side, this 32 mm bore suits clamping and transfer tasks in the 20-35 kg class. Step down to ACED25 (206.2 N at 0.5 MPa) for lighter pick-and-place, or up to ACED40 (571.8 N) when a heavier fixture needs pushing. The 75 mm stroke sits well inside the 200 mm standard range for bore 32. Note that a plain double-rod cylinder drifts when air is lost - add a rod lock or pilot check if the load must stay put. Mounting brackets (FA/FB flange, LB foot, FTC) and I/Y rod knuckles bolt to the ISO 21287 face, and the female M8x1.25 rod thread takes standard tooling.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Short stroke fits the compact body
- ✓ Port/thread type (PT / G)
- ✓ Add -S if you need the magnet for sensors
- ✓ Rod type (female / male B) & mount (FA/LB/CA)
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Compact body: keep the stroke short and avoid side load on the rod.
- check Do not dismantle the threaded front/back covers.
- check Keep speed within the rated range; the TPU bumper absorbs stroke-end energy.
- check Installation by qualified personnel per AirTAC docs.
Airtac ACED Double-acting Compact Cylinder ACED32X75S FAQ
Because a rod exits both covers, force is equal in both directions: 345.6 N at 0.5 MPa and 483.8 N at 0.7 MPa, peaking at 70.5 kgf at 1.0 MPa. Both strokes use the rod-side area, so there is no push/pull difference. Operating range is 0.15-1.0 MPa (22-145 psi) with a 1.5 MPa (215 psi) proof pressure.
The ISO 21287 short body saves about 50% of the mounting length of an ISO 15552 profile cylinder, so the 75 mm stroke fits shallow machines. The S in the model code means the optional -S magnet is fitted, so CMSE or DMSE reed or solid-state switches clip into the body slots for end-of-stroke detection. A fixed TPU bumper at each end absorbs the stop.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac ACED Double-acting Compact Cylinder ACED32X75S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.